Precision Plug Valve The IPS Precision Plug Valve (PPV) is a precision machined manual valve manufactured from 100% virgin PTFE (all wetted surfaces) and PVDF Stem Nut. The PTFE body and stem perform equally well with harsh chemicals and ultra clean DI water. The basic construction is a single through orifice with a tapered body that matches the tapered plug for positive shut-off. Various orifice and port sizes are available as standard items. Other sizes and configurations are available on request. Our Precision Plug Valve are supplied in two configurations: • Straight Flow Pattern (“A” = standard) • Angled Flow Pattern (“B” = special) Specification: Operating Pressure 0 – 60 psi Temperature Range Line Media: -55ºC to + 100ºC (-67ºF to + 212ºF) Ambient: -55ºC to + 71ºC (-67ºF to + 160ºF) Leak Rating Bubble Tight international polymer solutions inc. • manufacturer of high purity flow control products www.ipolymer.com

INITIAL DRAWING F RECOMENDED MOUNTING HOLE DIAMETER G - PIPE H - TUBE REF. I - FLARE Precision Plug Valve: ORDERING FORMAT A Porting w/ Max Orifice PIPE 1/8” FNPT & 0.125” Orifice 1/4” FNPT & 0.250” Orifice 3/8” FNPT & 0.375” Orifice 1/2” FNPT & 0.500” Orifice 1/8” TUBE & 0.063” Orifice 1/4” TUBE & 0.188” Orifice 3/8” TUBE & 0.313” Orifice 1/2” TUBE & 0.436” Orifice 1/4” FLARE & 0.125” Orifice 3/8” FLARE & 0.250” Orifice 1/2” FLARE & 0.375” Orifice MATL. SPEC. DIMENSIONS ARE IN INCHES. BREAK EDGES/REMOVE BURRS. SURFACE FINISH TOLERANCES ON: DECIMALS ANGLES 1 JIRI DLAB DRAWN CHECKED APPROVED DATE...