Miniature Solenoid Valves Our IPS Miniature Solenoid Valves offer precision performance under extreme conditions. Offered as 2-Way and 3-Way Valves with four internal body configurations and five seat sealing methods, our IPS Miniature Solenoid Valves are suitable for a wide range of ultra clean to highly corrosive media applications. Our all virgin PTFE wetted surface design is ideally suited for semiconductor, pharmaceutical, bio-medical and chemical process applications. Configurable with a PTFE Hard Seat, FKM-Viton O-Ring Seat, FFKM-Kalrez O-Ring Seat, EPDM O-Ring Seat, or Aflas O-Ring Seat the IPS Miniature Series Solenoid Valve line provides unsurpassed chemical compatibility with a wide range of flow media. The all wetted PTFE body, valve stem and one piece diaphragm maintain a material inert boundary for ultra clean applications. HIGHLIGHTS: • PTFE design optimized for ultra clean and chemical compatibility. • Configurations available for various DC & AC voltages. • Continuous Duty Cycle Rated at controlled ambient temperatures and reduced pressures. • Valve seat and diaphragm designed for positive flushing and bubble-tight shut off. • Non porous diaphragm configured to completely isolate solenoid coil from media. • 100% coil driven – does not require energizing pressure or vacuum to operate. • O-ring seat configurations for vacuum and complex media applications. • Designed for aggressive media and elevated temperature. international polymer solutions inc. • manufacturer of high purity fluid handling products www.ipolymer.com | in

General Valve Parameters 1/8 Orifice Cv (2-Way / 3-Way) Common Port Vacuum in-Hg (max gauge)* Typical Response Time (msec) Media Temperature (range) Ambient Temperature (range) Voltage Tolerance Coil Lead Length (3 Wire) (Red is Hot / White is Neutral / Green is Ground) Maximum Port Pressure Rating (psi)* RoHS Compliant Common Port Normally Closed Port Normally Open Port Inlet Port Outlet Port Conduit Connector Coil available. Call Customer Service. Inlet Port Outlet Port *Referenced values based on opposing ports open to atmosphere. Vacuum Rating assumes O-Ring Seal and opposing ports open to...

Solenoid Valves: ORDERING FORMAT M See Below 3-Way Valve Only Valve Series Valve Seat Auxiliary Plate (optional see below) E = EPDM A = Aflas V = Viton (FKM) K = Kalrez eq. (FFKM) T = PTFE (Hard Seat) See Porting chart below Valve Configuration 2C = 2 Way Normally Closed 2O = 2 Way Normally Open 3W = 3 Way (See Port Arrangements) Coil Wattage H = Standard Coil Body Shape S = Square Port Selection F = Female NPT T = Tube Compression FF = Flare Connection Consult Factory For Custom Configurations. Porting w/ Max Orifice PIPE 22 44 66 86 1/8” FNPT & 0.125” Orifice 1/4” FNPT & 0.250” Orifice 3/8”...

Miniature Solenoid Valve 1/8” 2-Way FNPT (Round Body) Typical for 1/8” and 1/4” Models Typical for 3/8” and 1/2” Models Square Body Round Body 4-40 X .50 LG MOUNTING STUDS 3-WAY ONLY * Two Mounting Studs are supplied (standard). Call factory for alternate mounting options. Care must be taken to limit the applied torque on the Mounting Studs: 7 - 9 in-lbs max IPS Product Notes: 1. Please email Customer Service at [email protected] 2. Call us for special applications. We can manufacture our Valves with special mounting and interface dimensions. 3. Upon request, alternate material selection from...