Metering Valve IPS Metering Valve (MV) use a tapered plug-stem to give a fine adjustment to the flow in addition to a full, open, or positive shutoff postition. Our Metering Valves come in two configurations: Straight Flow Pattern (standard) and Angled Flow Pattern (special). IPS Metering Valves are considered low pressure valves. The PTFE all-wetted surface design works equally well with ultra clean DI water and harsh chemical media. As with all Metering Valves, we recommend filtering the media prior to entering the valve. Specifications: Media Pressure Media Temperature Ambient Temperature Metering Valve Flow Characteristics: Metering Valve Orifice 0.094” Orifice 0.125” Orifice 0.188” Orifice 0.250” Orifice 0.313” Orifice 0.375” Orifice 0.438” Orifice 0.500” Orifice H2O & Air Flow based on nominal 70°F DI Water & Shop Air at 50 psi international polymer solutions inc. • manufacturer of high purity flow control products www.ip

F RECOMENDED MOUNTING HOLE DIAMETER F RECOMENDED MOUNTING HOLE DIAMETER G - PIPE H - TUBE REF. I - FLARE MATL. SPEC. DIMENSIONS ARE IN INCHES. BREAK EDGES/REMOVE BURRS. SURFACE FINISH 125 UNLESS OTHERWISE NOTED Metering Valve: ORDERING FORMAT G - PIPE H - TUBE REF. I - FLARE ANGLED FLOW PATH Port & Orifice Size Porting w/ Max Orifice PIPE 1/8” FNPT & 0.125” Orifice 1/4” FNPT & 0.250” Orifice 3/8” FNPT & 0.375” Orifice 1/2” FNPT & 0.500” Orifice 1/8” TUBE & 0.094” Orifice 1/4” TUBE & 0.188” Orifice 3/8” TUBE & 0.313” Orifice 1/2” TUBE & 0.436” Orifice 1/4” FLARE & 0.125” Orifice 3/8” FLARE & 0.250”...