Catalogs >
International Polymer Solutions Inc. >
IPS PTFE HP Pneumatic Valve Catalog

IPS PTFE HP Pneumatic Valve Catalog
2Pages

Catalog excerpts

PTFE HP Diaphragm Valve Our IPS PTFE HP Diaphragm Valve (HPV) is designed for use in high purity water and aggressive chemical applications. Designed with a 100% virgin PTFE wetted flow path, the unit is ideal for DI Water Systems and corrosive media found in solar, semiconductor, pharmaceutical and chemical process applications. Offered in 2-Way and 3-Way port configurations, our all wetted PTFE HPV2 and HPV3 diaphragm valves are an excellent complement to our Mini and Submini pneumatic valve families. The compact design of the IPS HP valve series makes it ideally suited for tight spaces in process cabinets and panels. The unit base mounts and can be supplied rack mounted on a common Polypro base for ease of installation. The Actuator Housing options include: Polypropylene ("PP") Anodized Aluminum ("AA") Other sizes and configurations are available on request. Specifications: Materials of Construction: • Wetted Surfaces: Machined 100% Virgin PTFE & TFM • Non Wetted Materials: PVDF, Polypro, SS, AA Pressure Ranges: • Maximum Inlet Pressure: 80 psi (551 kPa | 5.51 bar) • Maximum Vacuum: 27” Hg • Consult factory when operating valve with pressures and/or vacuums combinations other than just the common port. • Pneumatic Actuation: • Pressure Range: 50 psi (3.45 bar) to 100 psi (6.89 bar) depending on media pressure conditions • Pressure Source: Conditioned Dry Air international polymer solutions inc. • manufacturer of high purity flow control products www.ipoly

Open the catalog to page 1

ACTUATION PORTS 10-32 UNC THREAD PTFE High Pressure Valve: ORDERING FORMAT HPV3 — 42F — 123 — PP HP Valve Type HPV3 = High Pressure Valve 3-Way Porting w/ Max Orfice 22P = 1/8” FNPT & 0.125” Orifice 21T = 1/8” TUBE & 0.094” Orifice 43P = 1/4” FNPT & 0.188” Orifice 43T = 1/4” TUBE & 0.188” Orifice 42F = 1/4” FLARE & 0.125” Orifice Port Orientation Actuator Housing AA = Anodized Aluminum PP = Polypropylene Looking Down at the Top of the Coil 123 NC HPV2 — 42F — NC — PP HP Valve Type HPV2 = High Pressure Valve 2-Way Porting w/ Max Orfice 22P = 1/8” FNPT & 0.125” Orifice 21T = 1/8” TUBE &...

Open the catalog to page 2

IPS PTFE HP Pneumatic Valve Catalog 2Pages

Catalog excerpts

All International Polymer Solutions Inc. catalogs and technical brochures

IPS PTFE HP Pneumatic Valve Catalog
2Pages