Chemical Resistant Valves Chemical Resistant (CR) Valves offer chemical and corrosion control through a complete fluoroplastic design and construction. All wetted surfaces are manufactured from virgin PTFE. Pneumatic Actuator, Base and Bands are constructed from PVC, Polypropylene or PVDF. The polymer components selected for our IPS CR Valve line are specifically suited for use with ultrapure water, deionized water, solvents, chemicals and liquid flowing bio-matter. Our PTFE Bellows-style valve stem and PTFE valve seat help ensure the valve self-flushes a wide variety of flowing media. Special custom configurations are available on request. These include: manifold valve assemblies with multiple ports and high ambient temperature pneumatic actuators. Flow for distribution (One Inlet & Multiple Outlets) and flow for blending or selection (Multiple Inlets & One Outlet) available. • Distribution flow is standard. • Please specify at time of order. Max Pressure (Distribution Flow)1 Inlet Port-psi Outlet Port-psi Actuator Pressure (Min/Max) Wetted Surfaces Actuator / Base / Bands (see notes on page 2) Actuator Port (see sketch) Inlet Port (FNPT = Standard) Outlet Port (FNPT, Tube or Flare) 1 Pressure listed for Distribution Flow Configuration. Call IPS Factory for Selection Flow Configuration. international polymer solutions inc. • manufacturer of high purity fluid handling products www.ipolymer

ORDERING FORMAT ORDERING FORMAT CR POL 4W 8 P O C C CR POL 4W 8 P O C C .20 THRU (TYP) MOUNTING HOLES (3/8"-1" VALVES ONLY) O C = NORMALLY CLOSED = NORMALLY OPEN AIR TO CLOSE ACTUATOR PORT O = NORMALLY OPEN AIR TO CLOSE ACTUATOR PORT (1/4" - 1/2" CR VALVES ONLY) Single inlet & mu MulƟple D specify at Ɵme of order. • Custom size & port connecƟons are ava • * Call IPS Factory for 5-Way to 14-Way AIR TO CLOSE ACTUATOR PORT (1/4" - 1/2" CR VALVES ONLY) INLET PORT (FNPT, TUBE OR FLARE ) T = TUBE PORT CONNECTION F = FLARE P = FNPT T = TUBE 2 WAY = 2W 4 = 1/4" F = FLARE 3 WAY = 3W 6 = 3/8" PORT CONNECTION...