Drain Valve IPS Drain Valve (DV) series is a large orifice valve capable of handling large volumes of corrosive fluids via an all non-metallic wetted surface. For cost efficiency this valve is fabricated from PVC or Polypropylene. However, it is available in PVDF or PTFE, with Kalrez O-rings. This valve is also available in 2, 3 and 4 way configurations with each port operating independently. The “DV” can be operated either by air to open/air to close or by spring return. Either operating method can be specified in the ordering format. Custom configurations available. Applications Primarily used for quick draining and filling of process tanks which contain mild solutions or DI water. For hard to handle media the “DV” valve, machined from PVDF or PTFE, is the perfect solution. Specifications: Inlet Media Pressure Media Temperature PVC 140ºF/60ºC Polypropylene 160ºF/70ºC PVDF 212ºF/100ºC PTFE 320ºF/160ºC Actuation Pressure O-Ring Material 45 - 60 psi Ethylene Propylene (standard) Viton or Kalrez® FFKM equiv. international polymer solutions inc. • manufacturer of high purity flow control products www.ipolymer.com | inf

Actuation Port (to close valve) Actuation Port (to open valve^ Outlet Ports Drain Valve: ORDERING FORMAT Drain Valve Valve Configuration - PVDF = Polyvinylidene Fluoride Port & Orifice Size- O-Ring Type KA = Kalrez® FFKM equiv. Porting Configuration C = Spring to Close, Air to Open O = Spring to Open, Air to Close A=Port 3) shown upper left corner shown upper left corner 1. Please email Customer Service at [email protected] 2. Call us for special applications. We can manufacture our Valves with special mounting and interface dimensions. 3. Upon request, alternate material selection from those...