CureRight Radiometer

Is the energy level high enough? Are the lamps intense enough? Complete, and easy to understand analysis of your UV process Is the system in need of maintenance? Filtration options The ILT800 spectral filtration was designed to match the photoninitators’ response to UV light which is directly related to its absorption and is very wavelength selective. Most lamps emit broadband UV/IVS/IR, and the lamps output may not change evenly over all wavelengths. The ILT800 filters were designed to monitor changes in output in the areas that effect the absorption, and in turn the effectiveness of the curing....

Measure Spot, Area, Flood, Belt & Oven Lamps & LED Sources without confusion, without a computer, without a doubt p It is important to control not only the dose of the UV light t that the products receive, but also the irradiance level, to ensure proper curing throughout the entire coating or layer. In order to verify that the proper irradiance is maintained along the entire exposure path, a profiling radiometer is required. The ILT800 is a self-contained, powerful yet easy-to-use meter that captures, displays and stores all your data, across all your UV/VIS processes. The ILT800’s rapid measurement...

Custom Filtration Range Readout 4.5 decade (5 mW/cm2 to 40 W/cm2) mW/cm2, mJ/cm2, J/cm2 & profile⁄graph, Date, Time, Temp Sensors Linear, Solid State, GaAsp, & SiC Dimensions 102 x 152 x 12.7 mm (L/W/H) Display 19 x 77 mm OLED Power Micro USB & Rechargeable Battery Temp 0 - 75 degrees C (internal case temp) Input Optic Cosine corrected difuser Memory 400,000 data points Ensure the Cure The ILT800 comes with an extensive software suite including the CureRight internal meter software, CureRight PC software for programming and data extraction, and ILT’s Datalight III with full API for custom programming....