ILT5000 Research Radiometer & Picoammeter WIRED & WIRELESS Versions SPECIFICATIONS Meter: • • • • • • • • • • Measurement Range: 100 fA – 1 mA. Reverse Bias: (2 Voltages/selectable). Automatic Ranging: Rapid switching through all current levels. WiFi: Enabled. Operating Temperature: -40 to 85oC (Calibrated Irradiance 0-40oC) USB: USB2, Including Power, for Single and Multiple Systems USB Current Draw: 500 mA max, 250 mA typical Size: 1-3/5” H x 5” W x 7” L Input connector: D-Sub and/or SMA. CE certified: No rf/noise. CLI: Command line interface sent over a serial port Trigger: TTL, for synchronization of measurement** Data Storage: Internal (includes units, date and time stamps) Time Line: Scheduled data acquisition Integration Range: Unlimited dosage/exposure Transmission/Reflectance: (100%) Optical Density: 0.00 to 4.00 Zero: (Dark or ambient subtraction) Direct Reading: Current or calibrated optical units Apps: Meters, CLI, Bar, Trend and Reports apps all included ** Coming soon: TTL trigger and Flash App for pulsed light measurement Minimum Computer System Requirements: • Tablet: Minimum 8” tablet • Operating System: Windows 7 or 8 • Memory/RAM: Minium 1 GB RAM (on board) • Storage: 32GB (flash or SSD) • Processor: at least1.83GHz (with minimum 2MB Cache) • Ports: 1 Micro-USB 2.0 Port • Wi-Fi® Wireless networking (802.11b/g/n) • Bluetooth® v 4.0 Also Recommended: • Micro SD/SDHC/SDXC Card slot (extra storage, data offloading/backup) • OTG Cable (Micro-USB 2.0 to USB 2.0 (for program updates as needed) • Micro-USB to Ethernet Cable for Non-wireless Network Connectivity • 10 Decade Dynamic Range of Optical Analysis. • Wireless Transmitter, Built-in. • Made in USA. • Autorange, Autodark, Auto-sample with User Control Options. • 4-20 mA Output. • “Set It & Forget It” Remote Data Logging. • Built-in Re-Chargeable Battery Pack. • Multi-System Simultaneous Continuous Monitoring • DataLight II Complementary Light Measurement and Data Collection Software Apps. • Labview Compatible. • NIST-Traceable/ISO17025 Accredited Calibration and Certificate. • Backwards Compatible with ILT1700 SED Detector/ Filter/Optics. • Sample Rate Up to 100 Hz, Programmable. • Custom & OEM Inquiries Welcome. DESCRIPTION The ILT5000 is “The ILT1700 for the 21st Century” improving on the industry standard with rapid measurements (up to 100 Hz), a broader dynamic range (100fA to 1mA), extensive supporting software apps, wireless coomunication, internal data storage, and 4-20 mA output. The broad linear dynamic range of the ILT5000 and the SMA input connector allow the meter to also serve as a broadrange, highly sensitive and accurate range pico ammeter. The ILT5000 supports numerous light measurement applications including, but not limited to; Radiometry, Photometry, Reasearch, UVGI- Sterilization, Solar, Photoresist, Optical Radiation Hazard, Phototherapy, Photo-degradation, Plant Gro

DataLight II ILT5000/ILT1000 Software The ILT5000 comes with a complementary basic Labview DLL sample code, an extensive API and ILT’s DataLight II light measurement and data collection software. ILT5000 Meter Readout on PC/Tablet Screen Meters - Designed to maintain the look and feel of the Industry Standard ILT1700 Research Radiometer. Designed for wireless use with windows 8 tablets and touch screen computers, the larger, user-friendly panel includes buttons for hold, zero, integrate, factor, range, average and units selection. ILT5000 Bar Analysis on PC/Tablet Screen BAR - Allows multisystem,...