Damper Valve Saturnia
2Pages

SATURNIA - Damper Valve Description ON-OFF and regulating service of gas and air flow for: – Cogeneration and incineration plants – Steel and cement works – Air treatment – Thermal combustion plants – System for energy recovery from waste – Power plants – Pulp and paper industry – Chemical and petrochemical plants – Furnaces – Marine industry Technical Data Metal seal valve with controlled leakage to intercept or regulate the flow of fumes and air with working temperatures of up to 600°C (higher temperatures on request) Leakage classes are in compliance with EN1349 and ANSI B16.104 Shaft seal is garanteed by the PTFE or graphite (for use with higher temperatures) braid packing – Max working temperature 600°C – Max working pressure 2 bar – WAFER or FLANGED version for flanges EN 1092-1 PN6-10-16 and ANSI B 16.5 class 150 – Standard series DN 50 – DN 2000 (others available on request) – Max leakage class: III = 10-³ x nominal valve capacity (EN1349) – Manual operation with lever or gear – Automatic operation with pneumatic or electrical actuator – Proportional control valve with electro-pneumatic positioner with input signal 4-20 mA Material Carbon steel (S275 JR, ASTM A 516, COR-TEN) with Epoxy coating and coating resistant up to 600°C, stainless steel AISI 304, 316, 321, 309 or 310 All valves are available in different versions accord

SATURNIA - Damper Valve Butterfly Damper Valve Metal-to-metal seal butterfly valve with controlled leakage to intercept or regulate the flow of fumes and air with working temperatures of up to 300°C Versions: wafer and flanged (double flanged) Metal-to-metal seal butterfly valve with controlled leakage to intercept or regulate the flow of fumes and air with working temperatures of up to 600°C Versions: wafer and flanged (double flanged) Metal-to-metal seal butterfly valve with controlled leakage to intercept or regulate the flow of fumes and air with working temperatures of up to 1100°C...