E3TA Series
2Pages

Catalog excerpts

M18 Photoelectric Sensor with Teach-in Function INSTRUCTION MANUAL ! WARNING Thank you for selecting IMS product.This sheet primarily describes precautions required in installing and operating the product.Before operating the product,read the sheet thoroughly to acquire sufficient knowledge of the product.For your convenience,keep the sheet at your disposal. Failure to follow these instructions may result in serious injury or death: Fail-safe device must be installed when using the unit with machinery that may cause serious injury or substantial economic loss. (e.g. nuclear power control, medical equipment, ships, vehicles, railways, aircraft, combustion apparatus, safety equipment, crime/disaster prevention devices,etc.) Failure to follow these instructions may result in product damage: Do not use this unit over rated voltage; Do not use this unit where there is flammable or explosive gas; Do not use this unit where there is vibration or impact; In cleaning the unit, do not use water or an oil-based detergent. • High performance ASIC based advance sensor • Long product life time, 5us modulated pulse with 1/10 duty cycle reduced aging of LED • Build in 100ms power on delay, self-recover short circuit protection, reverse polarity, over voltage protection • Excellent noise immunity to DC light with modulated light source and CDS signal process technology • Mode selection for light on and dark on • Visible super bright red light for easy alignment • Distance adjustable using teach in • IP65 grade Sensing method □ Operating timing diagram ^ The waveforms of”Operation indicator”and” Transistor output”are for Light on mode.

Open the catalog to page 1

Fixing bracket（sold separately） Control output circuit diagram NPN open collector output （Brown）+V Stability （green） Main circuit Operation （orange） Over current protection Load (Black) output Max.100mA 10-30VDC （Blue）0V （White） Dark ON control Light ON PNP open collector output （Brown）+V Operation （orange） Over current protection Main circuit Stability （green）（Blue）0V （White） Dark ON control Light ON Installation and sensitivity adjustment Dimensions Sensor Mounting hole dimension Sensitivity adjuster Operation indicator （orange） Stability indicator （green） Optical axis of receiver...

Open the catalog to page 2

E3TA Series 2Pages

Catalog excerpts

All Intellisense Microelectronics catalogs and technical brochures

E3TA Series
2Pages