Catalogs >
Intellisense Microelectronics >
BA photoelectric sensor

BA photoelectric sensor
1 / 2Pages

Catalog excerpts

Model BA-mnnn INSTRUCTION MANUAL ! WARNING Thank you for selecting IMS product.This sheet primarily describes precautions required in installing and operating the product.Before operating the product,read the sheet thoroughly to acquire sufficient knowledge of the product.For your convenience,keep the sheet at your disposal. Failure to follow these instructions may result in serious injury or death: Fail-safe device must be installed when using the unit with machinery that may cause serious injury or substantial economic loss. (e.g. nuclear power control, medical equipment, ships, vehicles, railways, aircraft, combustion apparatus, safety equipment, crime/disaster prevention devices,etc.) Failure to follow these instructions may result in product damage: Do not use this unit over rated voltage; Do not use this unit where there is flammable or explosive gas; Do not use this unit where there is vibration or impact; In cleaning the unit, do not use water or an oil-based detergent. High performance ASIC based advance sensor Response time:1ms Long product life time, 5us modulated pulse with 1/10 duty cycle reduced aging of LED Build in 100ms power on delay, self-recover short circuit protection, reverse polarity, over voltage protection Excellent noise immunity to DC light with modulated light source and CDS signal process technology Mode selection for light on and dark on Sensing method □ Operating timing diagram ( Light source code ) Connection type Response time | Sensitivity Operation mode Sensing distance unit Sensing distance ( slot series use 30/50 to refer slot distance ) Sensing method ( slot series is none ) available Fixed | Numbed Sensing distance ^ The waveforms of”Operation indicator”and” Transistor output”are for Light on mode.

Open the catalog to page 1

Control output circuit diagram Main product Photoelectic sensor Light curtain Proximity sensor Pressure sensor Counting sensor Distance sensor NPN open collector output （+）Brown +V Stability (green) Operation (orange) Main circuit Load （OUT）Black Output Over current protection （C）White Control PNP open collector output Stability (green) Operation (orange) Main circuit （+）Brown +V Over current protection （-）Blue 0V （C）White Control Dimensions Operation(orange) Sensitivity adjuster Caution for using 1、Please make sure the wiring is correct before power-on. 2、Use a visor or a hood so that...

Open the catalog to page 2

BA photoelectric sensor 1 / 2Pages

Catalog excerpts

All Intellisense Microelectronics catalogs and technical brochures

BA photoelectric sensor
1 / 2Pages