TECHNICAL DATA SHEET (TDS) SURFACE PRO BRUSH® PRODUCT SHEET

1.1. Product Description Surface Pro Brush is a liquid applied natural latex that goes on pink in colour and then dries to a colourless hard surface protection film and protects the substrates it is adhered to from damages and contaminations. Surface Pro Brush is brush applied and is removed like a plastic film when protection is no longer required. Surface Pro Brush as a natural latex is biodegradable. Surface Pro Brush protects the substrates from damage, tracked dirt, paint spills, dust and contaminates. Surface Pro Brush is for internal use only. Surface Pro Brush has no UV resistance and...

Surface Pro Brush is for internal use only. Surface Pro can adhere to the following substrates. * Internal glass * Coated aluminium * Uncoated aluminium * Uncoated steel (warm or cold) * Concrete, brickwork, masonry, gypsum, composites * Ceramics (floors, baths) * Pink in colour, peelable film after drying * Minimum consumption: 0.5kg/m2 (500 microns) * Service temperature after drying: -20-40 degree Celsius * Pallets 96 tubs of 4kg - Total 384kg Surface Pro Brush should be stored in the dry, out of direct sunlight, between 5-20 degree Celsius. Storage for 24 months of manufacture date in original...

* Substrate is cohesive and clean and free of rust when applied on metal. * Substrate temperature during application is between 5-25 degree Celsius. * Apply a test on the substrate to be protected, to ensure compatibility. 2.2.2. * Minimum consumption: 0.5kg/m2 (500 microns) 2.2.3. * Depending on conditions and applied thickness, drying time is minimum 1 hour 2.2.4. * when Surface Pro Brush protection is no longer needed, remove in one go, but no later than 4 months. 2.3.1. * Surface Pro Brush can be cleaned using water 2.3.2. * Surface Pro Brush can be recycled once any Surface Pro Brush has...

SAFETY- Consult SDS sheet before use. Keep out of reach of children. Always refer to the C.O.S.H.H sheet

DON'TS 4.1. Do a 3-7 patch test on any substrate you intend on using the product on 4.3. Do use appropriate PPE according to the nature of the work 4.4. Clean up any spills in the area immediately to avoid slippery surface 4-5- use the drip tray when possible 4.6. Do store in a safe place away from freezing temperatures/extreme heats 4.7. Do recycle or clean and re-use empty tubs 4.8. Do use a wet film gauge to measure the thickness of the product 4.9. Do mask any surfaces areas you do not want to get hit from potential overspray 4.10. Do always follow H&S guidelines 4.11. Do always know where...

5.0 SURFACE PRO BRUSH GALLERY

6.0. DATE OF THIS EDITION: 12/01/2025/26 Our general conditions of sale apply. This document does not have a contractual value. This technical data sheet replaces and cancels the previous edition. The information given in this sheet has the purpose to inform and advise you. At every moment, this sheet can be adapted because of technical evolution. All information is given in good faith and without any warranty. The application use and processing of these products are beyond our control and therefore the entire responsibility of the user/client/applicator. The user of the product must test the...

(■) Scan MemETZERO WWW.INTELLIGENTMEMBRANES.COM 9 Of 9