LIME PRIME® |2025/26

Product catalog summary

Product Description: Lime Prime is an acrylic waterborne ultrafine primer based on micro emulsions, designed for application on porous and less cohesive substrates. It is used prior to applying Passive Purple or its editions to improve adhesion on difficult substrates.

Product Characteristics: Lime Prime is a milky white liquid with a density of 1.0-1.1 kg/l, a pH of 7-8, and a solid content of over 10%.

Product Packaging and Storage: Available in 10 KG tubs, with 44 tubs per pallet totaling 440 liters. It should be stored in a dry place, away from direct sunlight, at temperatures between 5-35 degrees Celsius, and can be stored for up to 24 months in its original unopened packaging.

Application Preparation: Ensure the substrate is free from dust and friable parts. Lime Prime should not be diluted and must be shaken before use.

Application Procedure: Apply using a low-pressure spray machine until saturation, approximately 200 gr/m2, depending on substrate porosity. Do not apply in direct sunlight and ensure a minimum application temperature of 5 degrees Celsius. Allow to dry before applying Passive Purple or its editions.

Cleaning: Lime Prime can be cleaned with water. Containers and lids are recyclable after cleaning.

Disclaimer: The information provided is for guidance and does not hold contractual value. Users are responsible for testing the product's suitability for their intended purpose. Liability is limited to the value of goods supplied by Intelligent Membranes.

Catalog excerpts

TECHNICAL DATA SHEET (TDS)

Open the catalog to page 1

Lime Prime is an acrylic waterborne ultrafine primer based on micro emulsions, applied on porous and less cohesive substrates, prior to the application of Passive Purple or Passive Purple Editions. The use of Lime Prime will consolidate and improve the adhesion of Passive Purple and Passive Purple Editions in difficult substrates. Lime Prime will adhere to the following. Concrete bricks ,Calcium silicate stone, Lime renders Porous and Less cohesive services Old dusty substrates Water sensitive substrates such as Gypsum boards and plasters * Colour - Milky white * Pallets 44 of 10KG tubs - Total...

Open the catalog to page 2

* Do not apply in direct sunlight * Minimum application temperature of 5 degrees Celsius * Apply Lime Prime with a low-pressure spray machine * Apply Lime Prime until saturation – approximately 200 gr/m2 depending on the porosity of the substrate * Allow Lime Prime to dry before applying Passive Purple or Passive Purple Editions * Lime Prime can be easily cleaned using water. * Lime Prime jerry cans and lids can be recycled once any Lime Prime product has been removed from the tubs and lids. This can be cleaned off using water. FOLLOW ONLINE Canada +1 (613) 927 Canada +1US (613) 9271011 1011...

Open the catalog to page 3

5.0. DATE OF THIS EDITION: 12/10/2025/26 Our general conditions of sale apply. This document does not have a contractual value. This technical data sheet replaces and cancels the previous edition. The information given in this sheet has the purpose to inform and advise you. At every moment, this sheet can be adapted because of technical evolution. All information is given in good faith and without any warranty. The application use and processing of these products are beyond our control and therefore the entire responsibility of the user/client/applicator. The user of the product must test the...

Open the catalog to page 4

FOLLOW ONLINE Canada +1 US (613) 927 1011 FOLLOW US ONLINE

Open the catalog to page 5

LIME PRIME® |2025/26

LIME PRIME® |2025/26

Catalog excerpts

All Intelligent Membranes catalogs and technical brochures