THE GOAT® 18KG | 2025/26

Product catalog summary

Product Description and Characteristics
The GOAT is a solvent-free, reactive waterproof coating available in green, black, and white. It is applied with a paintbrush or roller to form a flexible, waterproof membrane. It adheres well to various materials including concrete, bricks, plastics, and insulation boards. The product is suitable for both horizontal and vertical applications and can withstand positive and negative water pressure. It is crack-bridging, elastic, and resistant to freeze-thaw cycles.

Application Procedures
Preparation involves cleaning surfaces and removing contaminants. The GOAT should be applied in one layer using a spreader or roller, with a minimal consumption of 2 kg/m². Initial setting time is 60 minutes, with a final setting time of 120 minutes. The product should not be cleaned with water but with the GOAT Cleaner.

Product Storage
The GOAT should be stored in a dry place, away from direct sunlight, at temperatures between 5-25°C. It has a shelf life of 24 months in unopened packaging.

Packaging
The product is available in 18kg tubs, with pallets containing 33 tubs each.

Performance and Testing
The GOAT has been tested for waterproofing, adhesion, tensile strength, and resistance to various environmental conditions. It passes several standards including EN 14891 for waterproofing and EN 1504-2 for adhesion.

Do's and Don'ts
Do use appropriate PPE, store properly, and follow safety guidelines. Do not use in temperatures below 3°C or in rain, and do not dilute with water or solvents.

Gallery and Examples
Examples of applications include rooftops and basement floors, demonstrating the product's versatility in different environments.

Disclaimer
The information provided is for guidance and may be subject to change. Users are responsible for testing the product's suitability for their specific applications.

Catalog excerpts

TECHNICAL DATA SHEET (TDS)

Open the catalog to page 1

1.1. Product Description The GOAT is an innovative solvent free reactive waterproof coating. The GOAT is applied with a paintbrush or roller to form a waterproof and flexible membrane. Excellent adhesion to various surfaces and good UV resistance. The GOAT can be applied on damp surfaces. The GOAT is suitable for both horizontal and vertical applications and can withstand both positive and negative water pressure. For waterproofing of structures in concrete or masonry such as basements walls, basement roofs, foundations, terraces and pipe penetrations. • Waterproofing for both positive and negative...

Open the catalog to page 2

Initial setting: 60 minutes Final setting 120 minutes Waterproofing (positive and negative water pressure: > 2.5 bar (EN 1504-2 2005) Crack Bridging (after 500h): 2mm Pallets 33 18KG tubs - Total 594 KG The GOAT should be stored in the dry, out of direct sunlight, between 5-25 degrees Celsius. Storage for 24 months of manufacture date in original unopened packaging. Remove dust, loose parts and standing water from the surface Remove salt efflorescence and other surface contaminants that can affect adhesion If needed carry out repairs with a fast setting mortar Close water infiltrations with a...

Open the catalog to page 3

Open the catalog to page 6

ADHESION OF REPAIR LAYER APPLICATION ON 6 MONTHS OLD COATING COATING APPLICATION ON 6 MONTHS OLD COATING METAL SUBSTRATE RESISTANCE TO TEMPERATURE AND AGEING EFFECTS

Open the catalog to page 10

XPS 300 SL ADHESION BONDED WITH THE GOAT ON THE GOAT COATING COATING THE GOAT ADHESION WITH PL PRIMER ON ICF DELAMINATION TEST DELAMINATION TEST SAFETY- Consult the Safety Data Sheet prior to application. Work in ventilated areas. Always refer to the C.O.S.H.H sheet. Canada +1 (613) 927 1011 FOLLOW US ONLINE

Open the catalog to page 12

4.1. Do use appropriate PPE according to the nature of the work 4.2. Clean up any spills in the area immediately to avoid slippery surface 4.3. Do store in a safe place away from freezing temperatures/extreme heats 4.4. Do recycle or clean and re-use empty tubs 4.5. Do use a wet film gauge to measure the thickness of the product 4.6. Do mask any surface areas you do not want to get hit from potential product over install 4.7. Do always follow H&S guidelines 4.8. Do always know where on site accident kit is kept in case of emergency 4.9. Do always read the product sheet for further instructions...

Open the catalog to page 13

5.0 The GOAT-Gallery 5.1. The G.O.A.T examples: 5.1.2 The G.O.A.T in White on a rooftop 5.1.3 Application around a service penetration 5.1.4 The G.O.A.T in grey on a rooftop 5.1.5 Application on a basement floor 5.1.6 Application on a basement floor 5.1.7 Application on a basement floor Canada +1 (613) 927 1011 FOLLOW US ONLINE

Open the catalog to page 14

6.0. DATE OF THIS EDITION: 12/01/2025/26 Our general conditions of sale apply. This document does not have a contractual value. This technical data sheet replaces and cancels the previous edition. The information given in the sheet has the purpose to inform and advise you. At every moment, this sheet can be adapted because of technical evolution. All information is given in good faith and without any warranty. The application use and processing of these products are beyond our control and therefore the entire responsibility of the user/client/applicator. The user of the product must test the...

Open the catalog to page 15

Canada +1 (613) 927 1011 FOLLOW US ONLINE

Open the catalog to page 16

THE GOAT® 18KG | 2025/26

THE GOAT® 18KG | 2025/26

Catalog excerpts

All Intelligent Membranes catalogs and technical brochures