RS26 RS28-OB RS32
47Pages

Rider Auto Scrubber Operator & Parts Manual INTELLIGENT CLEANING EQUIPMENT

OPERATOR MANUAL READ OPERATOR MANUAL CAREFULLY! IMPORTANT: To ensure full warranty protection, please fill out & return your warranty card. Please fill out at time of installation for future reference. Model No. Serial No. Machine Options Sales Rep. Sales Rep. Phone No. Customer ID Number Installation Date HOW TO ORDER PARTS Only use ICE Company supplied or equivalent parts. Parts and supplies may be ordered online,by phone, by fax or by mail. 1. Identify the machine model. 2. Identify the machine serial number from the data label. 3. Ensure the proper serial number is used from the parts...

OPERATOR MANUAL SAFETY PRECAUTIONS - Avoid any contact with battery acid - Avoid moving parts. Do not wear loose fitting clothing while servicing machine. This machine is intended for commercial use. It is designed exclusively to scrub hard floors in an indoor environment and is not constructed for any other use. Only use recommended accessories. All operators shall read, understand and exercise the following safety precautions: 1. Do not operate machine: - Unless trained and authorized. - Unless you have read and understand the operators manual. - In flammable or explosive areas. - With...

OPERATOR MANUAL MACHINE COMPONENTS 1. Solution tank 2. Hose fill port & Cap 3. Squeegee assembly 4. Wheels, 10 inch 5. Scrub head assembly 6. Side squeegee assembly 7. Watching window, onboard battery charger 8. Brake pedal 9. Propel pedal 10. Front drive wheel 11. Operator seat 12. Steering wheel 13. LED light, work 14. Adjusting handle, seat 15. Off-board battery charger receptacle 16. Detergent level watching window 17. Warning light 18. Recovery tank cover 19. Recovery tank 20. Cup holder 21. Cap 22. Detergent bottle 23. Battery box

OPERATOR MANUAL MACHINE COMPONENTS 24. Directional switch 25. Main power key switch 26. Emergency stop switch 27. Warning light switch 28. Vacuum motor switch & indicator 29. Detergent dosage adjusting buttons & indicator 30. Batteries meter 31. LED display screen 32. Fault indicator 33. Fault code 34. Fault message 35. Hour meter 36. Solution flow adjusting buttons & indicator 37. Horn button 38. 1-Step switch & Indicator 39. Brush pressure adjusting button & indicator 40. Drain hose, recovery tank 41. Drain hose, solution tank 42. Vacuum hose

OPERATOR MANUAL MACHINE SET UP & INSTALLATION UNCRATING MACHINE Be sure and check packing carton for any damage. Immediately report any damage to carrier. Check the contents of package to ensure that the following items are included: • Machine • 4-6V Batteries • Squeegee assembly • 2-Pad drivers 3. Carefully place the batteries into the compartment as shown in figure below. Place the battery brace at the rear of the batteries. NOTE: Do not drop the batteries into the compartment! 4. Connect battery cables to posts in numbered order as shown in drawing below. NOTE: RED to POSITIVE and BLACK...

OPERATOR MANUAL 5. For Orbital head model RS28-OB, you need to attach a rectangular 28in (710mm) ×14in (356mm) pad to the Orbital Pad driver, align the pad to the orbital pad driver, press from to back and side to side to alignment. MOUNTING THE SQUEEGEE ASSEMBLY 1. Turn off the 1-Step switch and raise the Squeegee assembly off the floor. 2. Mount the squeegee assembly to the squeegee pivot bracket. make sure the knobs are completely seated into the slots before securing knobs. 3. Connect the Vacuum hose (machine components, #42) to the squeegee assembly. Loop the hose by using the hose...

OPERATOR MANUAL 6. Press the Propel pedal, the machine start scrubbing, the speed can be adjusted by controlling the force of foot stepping, light is slow, heavy is fast. NOTE: Go slow on inclines and slippery surfaces. 7. To stop scrubbing, turn off the 1-Step switch, the scrub head will raise automatically, the squeegee will also raise after a short delay (the vacuum indicator flashing), please keep moving until the dirty water is picked up, and then release the propel pedal and stop scrubbing. 8. Turn off the machine. BRAKE DEVICE The machine is drived by the Front drive wheel (machine...

OPERATOR MANUAL TANK DRAINING DRAINING THE RECOVERY TANK Any time scrubbing is completed, or when refilling solution tank, the recovery tank should be drained and cleaned. WARNING: If the recovery tank is not drained when the solution tank has been refilled, foam or water may enter the float shutoff screen and cause damage to the vacuum motor. 1. While holding the Recovery tank drain hose (machine components, #40) upward, remove the cap and lower hose to drain. 2. Open the Recovery tank cover (machine components, #18) and rinse out the tank. Use a rag to remove any excess dirt. Clean the...

OPERATOR MANUAL 4. Remove the vacuum fan inlet filter and rinse it out with clean water. 5. Clean machine with an approved cleaner and a damp towel. 6. Recharge the batteries. 7. Check the condition of the squeegee blade wiping edge, rotate blade if worn. MONTHLY MAINTENANCE 1. Clean the battery tops to prevent corrosion. 2. Check for loose battery cable connections. 3. Inspect and clean the recovery tank cover seal. Replace it if damaged. 4. Lubricate all grease points and pivot points with silicon spray and approved grease. 5. Check the machine for loose nuts and bolts. 6. Check the...

OPERATOR MANUAL FAULT CODE & SOLUTION FAULT CODE FAULT MESSAGE Seat Empty Squeegee Actt O.L. RE-START! Bru Actt O.L. RESTART! Vac Mtr O.L. RE-START! Left Bru Mtr O.L. RE-START! Right Bru Mtr O.L. RE-START! Propel Mtr O.L. RE-START! RecTank Full Soln Tank empty Batt Low Charge Batt Batt Empty Charge Batt NOW FAULT CAUSE Not sit in the seat SOLUTION Sit in the operator seat Squeegee lifting actuator is overload Scrub head lifting actuator is overload Vacuum motor overload Left brush motor is overload Turn off the machine,after a moment, RE-START machine. Right brush motor is overload Propel...