Intelligent USB Stepper Controller Driver 2 Phase Stepper Controller 2Amp Settable Phase Current 200-3200 SPR Phase Resolution Isolated USB Port 2 Limit Switch Inputs 3 Digital Inputs 2 Relay Outputs Stand-Alone Operation Ready Pulse & Direction Controlled ready GO/DIR/SPD Manual Controlled ready DIN-Rail Mounted ready The IA-3352 is an Isolated USB, 2Amp, Intelligent Stepper Controller Driver. Controller Communication Operation modes Digital inputs The IA-3352 has four operation modes. It can be controlled through its isolated USB port. It can be controlled through its Clock and Direction Inputs. It can be controlled through its GO and Direction Inputs, and it can operate in a Stand-Alone mode. While operated in its stand-alone mode it can be synchronized through its Digital Inputs and can handshake or operate other systems through its on board relays. The IA-3352 includes two Limit Switch Inputs and three General Digital Inputs that can be used both for remote monitoring and for its Stand-Alone operation. Isolated USB port Stand-alone / Manual / Pulse & Dir 2 Limit switches + 3 General inputs 2 Channels, 2Amp @ 30VDC Driver Motor type Phase current Phase resolution 2 Phase stepper motor 2Amp 200-3200 SPR General Supply voltage Size Weight Motor Phase Resolution and Motor Phase Current can be easily set by a software configuration utility or user command. www.intelligent-appliance.com Specifications are subject to change without notice

I A QQCO II Intelligent USB Stepper A/I IM'J JjZ'U Controller Driver Art Intelligent Appliance Operation Modes 1. Host operated via it on board USB port. 2. Stand-Alone operation mode configured via its on board USB port. 3. Pulse & Direction Controlled mode. 4. Manual Controlled mode. Wiring Table Ordering Information Intelligent USB Stepper Controller Driver USB Cable and installation CD Included Specifications are subject to change without notice