9 Relays COM Controlled IA Dazy-chain Series Intelligent Appliance Features 9 Relays 8 form C, 1 form A 8 Isolated Digital Inputs Handles both PNP and NPN Software utility and samples. Programmable initiate state. Daisy-Chaining Ready DIN-Rail mounting ready Introduction The IA-3136 is an intelligent 9 Power Relays module, with 8 Isolated Digital inputs that is controlled by a Dazy-Chain RS-232 communication method, and is a part of the IA Multi-module system. The IA-3136 includes 8 power form C relays that are capable of operating up to 8 pairs or 8 single loads, with an optional power up guard relay, or a general operation one. The 8 Digital Inputs has a wide voltage operation range, from less than 5V up to over 30V, and may be used as Isolated inputs, NONIsolated inputs or dry contact inputs. Special structure is provided to enable a simple wiring in one hand, and channel to channel isolation, if needed, in the other hand. Digital inputs and relays states are locally displayed, while modules address and modules initiate output states may be easily defined by software. Up to 256 IA-3136 modules, or any mix of IA modules may be easily controlled by a host computer or PLC, through a single COM port, or any other communication means as USB and LAN 8 Relays Contact current: Contact method: 1 Relay Contact current: Contact method: Digital Inputs Voltage Range: Isolation: Channels: Communication COM method: COM expand: Default BR: COM input: COM output: Host/Module cable: RS-232C Dazy-chain 19200 bps DB9 Female DB9 Male DB9 M/F pin-to-pin 3 wires, pin 2 ,3 and 5 up to 15m long Module/Module cable: DB9 M/F pin-to-pin 3 wires, pin 2 ,3 and 5 up to 15m long GENERAL Power supply: 24 VDC, 0.3Amp Module size: 205x115x45 mm Weight: 420 gr Ordering Information: IA-3136: 9 Relays, COM Controlled IA Dazy-chain Series # 256 Specifications subject to change without notice.