1. Catalogs
  2. IntelLiDrives, Inc.
  3. Planar motor rotary table ACR-335UT

Planar motor rotary table ACR-335UT

Planar motor rotary table ACR-335UT

Product catalog summary
Specifications:
  • Diameter: 463 mm
  • Aperture: 335 mm
  • Height: 22 mm
System Performance:
  • Center Aperture: 335 mm
  • Outside Diameter: 463 mm
  • Stage Height: 22 mm
  • Peak Torque (Tp): 100 Nm
  • Continuous Torque (air cooling, coil 120°C) (Tc120): 25 Nm
  • Peak Current at Tp: 15 Amp p rrms
  • Continuous Current at Tc: 4 Amp c rrms
  • Recommended Voltage: 310 Vdc / 220 Vac
  • Max Speed at Tp and Us: Not specified
  • Max Speed at Tc and Us: 120 RPM
  • Positioning Resolution: 5,820,000 counts/rev (standard), 11,640,000 (optional)
  • Positioning Resolution (arc-sec): 0.22
  • Accuracy: <10 Arc-sec
  • Repeatability: <1 Arc-sec
  • Run-out Axial/Radial: <10 micron
  • Rotor Inertia: 0.2 kg x m²
  • Stage Weight: 10 Kg
  • Axial Load: 50 Kg
Notes:
  • Rotary table can operate at lower voltages with reduced speeds.
  • Speed values are shown at rated torque.
  • Max speed may be limited by the controller's encoder frequency input. Sin/cos 1 Vpp and other encoder resolutions are available. Contact the factory for more information.
See more

Catalog excerpts

Planar motor rotary table ACR-335UT-1

ROTARY TABLE ACR-335UT (ULTRATHIN) Diameter 463 mm Aperture 335 mm Height 22 mm System Performance Center aperture Outside diameter Stage height Peak Torque Continuous torque air cooling, coil 120°C Peak current at Tp Continuous current at Tc Recommended voltage (note 1) Uvdc Uvac Max speed at Tp and Us (note 2) Max speed at Tc and Us (note 2) Positioning resolution (note 3) Positioning resolution Accuracy (arc-sec) Arc-sec Run-out axial/radial Rotor Inertia Stage weight Axial load Note 1: Rotary table can operate at lower voltages with lower speeds Note 2: Speed values shown at rated torque Note 3: Max speed may be limited by controller's encoder frequency input. Sin/cos 1 Vpp and other encoder resolutions available. Contact the factory.

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.