pct_292502

pct_292502
1 / 198 PagesView full catalog

pct_292502

Product catalog summary
Overview: The document provides comprehensive technical specifications and operational guidelines for Eaton's Integrated Hydraulics screw-in cartridge solenoid valves. These valves are designed for high-pressure applications up to 350 bar (5000 psi) and flow rates up to 227 L/min (60 USgpm). They are used in hydraulic systems for controlling fluid flow, offering features like low leakage, high durability, and compact design.
Specifications: The document details various solenoid valve types, including 2-way, 3-way, and 4-way configurations, with normally open and closed options. Key specifications include:
  • Pressure Ratings: Up to 350 bar (5000 psi) for high-pressure models.
  • Flow Rates: Up to 227 L/min (60 USgpm) depending on the model.
  • Temperature Range: -40° to +120°C (-40° to +248°F).
  • Seal Materials: Options include Nitrile and Viton®.
  • Housing Materials: Aluminum for pressures up to 210 bar, steel for higher pressures.
Valve Features and Benefits: Valves are fatigue tested for up to 10 million cycles, made with hardened steel for longevity, and feature a cartridge design for flexibility and minimal space requirements. They offer optional manual overrides and corrosion-resistant finishes.
Coils: Solenoid valve coils are available in standard voltages with various electrical connections. They are designed for continuous duty, interchangeable, and weather-proof. AC coils are internally rectified, and protection against voltage surges is recommended for certain applications.
Operational Details: In the de-energized state, valves block flow in both directions. Energizing the solenoid allows flow by lifting the poppet off its seat. Manual override options are available for certain models.
Warnings and Recommendations: Maintain a torque of 5-8 Nm (4-6 ft lbs) on the valve tube nut to prevent valve failure. Use steel housings for operating pressures above 210 bar (3000 psi).
Performance Data: Internal leakage is minimal, with less than 0.6 ml/min at 210 bar differential. Pressure drop and flow characteristics are provided in detailed graphs for various models.
Model Codes and Options: Various models are available with different port sizes, coil voltages, and termination options. Special features and manual override options can be specified.
Installation and Maintenance: Proper torque specifications are provided for installing the cartridges in aluminum or steel housings. The document warns against over-tightening the valve tube nut to prevent valve failure.
Additional Products: Eaton offers Weatherhead® Spring Guard and Abrasion Sleeve for hose protection, preventing damage and prolonging hose life. Part numbers and additional details are available in the Weatherhead® Hose Assembly Master Catalog.
See more

Catalog excerpts

pct_292502-1

Powering Business Worldwide Solenoid Valves Poppet and Spool type solenoid actuated valves for applications STËTton Brand Powaing Business Worldwide EATON Screw-In Cartridge Valves E-VLSC-MC001-E November 2009 A-1.A

 Open the catalog to page 1
pct_292502-2

Solenoid Valves Section Contents/Valve Locator Functional Symbol Flow Typical _]_ _ Solenoid2/2, NC, poppet_L/min (USgpm) bar(psi)_ Flow Typical Solenoid2/2 NC, bi-directional, poppet L/min (USgpm) bar (psi) Solenoid 2/2, NC, bi-directional, poppet Flow Typical Model Cavity Rating Pressure Page EATON Screw-In Cartridge Valves E-VLSC-MC001-E November 2009 Pmming Business Worldwide iteg rated

 Open the catalog to page 2
pct_292502-3

Solenoid Valves Valve Locator Functional Symbol L/min (USgpm) bar(psi) Solenoid 2/2, NO, bi-directional, poppet PowBring Business Worldwide L/min (USgpm) EATON Screw-In Cartridge Valves E-VLSC-MC001-E November 2009

 Open the catalog to page 3
pct_292502-4

Solenoid Valves Valve Locator Functional Symbol L/min (USgpm) bar(psi) L/min (USgpm) bar(psi) L/min (USgpm) bar(psi) L/min (USgpm) bar(psi) L/min (USgpm) bar(psi) L/min (USgpm) bar(psi) EATON Screw-In Cartridge Valves E-VLSC-MC001-E November 2009 Pmming Business Worldwide

 Open the catalog to page 4
pct_292502-5

Solenoid Valves Valve Locator Functional Symbol L/min (USgpm) bar(psi) L/min (USgpm) bar(psi) Flow Typical Model Cavity Rating Pressure Page Solenoid4/2, spool L/min (USgpm) bar (psi) Flow Typical Model Cavity Rating Pressure Page Solenoid4/2, spool L/min (USgpm) bar (psi) STËTton Brand PowBiing Business Worldwide EATON Screw-In Cartridge Valves E-VLSC-MC001-E November 2009 A-5.A

 Open the catalog to page 5
pct_292502-6

Solenoid Valves Valve Locator Functional Symbol L/min (USgpm) bar(psi) L/min (USgpm) bar(psi) L/min (USgpm) bar(psi) L/min (USgpm) bar(psi) L/min (USgpm) bar(psi) L/min (USgpm) bar(psi) L/min (USgpm) bar(psi) L/min (USgpm) bar(psi) nteg rated A-6.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E November 2009 ft»»i»a™»«»*»«* ÂTËaBn Brand

 Open the catalog to page 6
pct_292502-7

Solenoid Valves Section Overview Innovative Solutions This catalog gives basic line of Eaton's Integrated Hydraulics screw-in cartridge solenoid valves. Its purpose convenient reference tool when choosing Eaton's Integrated Hydraulics cartridge valves or designing a system using these components. featured in this catalog - typical application pressure typical application pressure recommended operating given system. The fatigue pressure rating is be free for infinite life from metal fatigue. Eaton's Integrated Hydraulics solenoid valves are offered with the widest choice of flow paths and position...

 Open the catalog to page 7
pct_292502-8

Solenoid Valves Coil Features directional valves in this catalog are offered with a choice of standard voltages and several types of electrical connections. For other coil consult your Eaton Standard AC coils are internally rectified to supply them with DC current, therefore they have no "inrush" current value. continuous duty • Coils offer a one-piece weather-proof encapsulated design, eliminating the need • AC voltage coils are internally molded into the coil is available as a standard option on DC coils. Also available, Rectified Coils The rectifiers used in these coils may require protection...

 Open the catalog to page 8
pct_292502-9

- Additional products, product lines, and services offered by Eaton - Don't Let Abrasion Stop You From Getting The Job DÌme. with Weatherhead® Spring Guard And Abrasion Sleeve From Eaton® Spring Guard and Abrasion Sleeve Details Powering Business Worldwide • Heavy duty defense against cuts • Sleeve can also be used to bundle two or more hose assemblies for protection and clean routing • Guard helps prevent kinks and crushing of hose assemblies • Prevents accidental damage and prolongs hose assembly life Additional Information number information "Accessory" section Hose Assembly Master Catalog,...

 Open the catalog to page 9
pct_292502-10

Poppet type, normally closed solenoid valve the valve blocks flow from port 2 to 1 and free flow is allowed When the solenoid is ener- gized the pilot poppet is pulled off the seat allowing the valve to open from port 2 to 1. in the reverse direction the flow is restricted by the pilot orifice. Hardened and ground work- ing parts. Lapped seat for low patibility. Continuously rated. Compact design with low pressure drop. Sectional View Performance Data Performance data is typical with fluid at 21,8 cST(105 SUS) and 49°C (120°F) Typical application pressure (all ports) Cartridge fatigue pressure...

 Open the catalog to page 10
pct_292502-11

Poppet type, normally closed solenoid valve Model Code Blank - Buna-N Manual Override Option Blank - No manual override For valve dimensions with manual override option installed see page A-980. Cartridge Only Blank - None Code Port Size I 7 I Valve Housing Material Omit for cartridge only Housing Number Cartridge only See section J for housing details. Torque cartridge in aluminum Note: When solenoid valve is ordered as cartridge only, coil Installation Drawing Connector Types Spade terminals Flying lead For coil part numbers and dimensions (Only required if valve has special Powering Business...

 Open the catalog to page 11
pct_292502-12

Poppet type, normally closed solenoid valve Sectional View the valve blocks flow from port 2 to 1 and free flow is allowed Performance Data When the solenoid is ener- gized the pilot poppet is pulled off the seat allowing the valve to open from port 2 to 1. in the reverse direction the flow is restricted by the pilot orifice. Hardened and ground work- ing parts. Lapped seat for low patibility. Continuously rated. Compact design with low pressure drop. 350 bar work- Performance data is typical with fluid at 21,8 cST(W5 SUSI and 49°C (120°Fj Typical application pressure (all ports) Cartridge fatigue...

 Open the catalog to page 12
pct_292502-13

Poppet type, normally closed solenoid valve Model Code Blank - Buna-N I 5 I Manual Override Option Blank - No manual override For valve dimensions with manual over- ride option installed see page A-980. Valve Housing Material Blank - Cartridge only Port Size Port Size Housing Number Cartridge only See section J for housing details. Voltage Rating "Optional arc suppression diode. Connector Types For coil part numbers and dimensions Special Features (Only required if valve has special Cartridge Only Torque cartridge in aluminum Note: When solenoid valve is ordered as cartridge only, coi Installation...

 Open the catalog to page 13
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.