SWITCH Hybrid pipette Intuitive manual control, rapid electronic aliquoting Speed up your workflow Manual pipette with a repeat dispensing option for rapid aliquoting Always have a hand free Easily adjust volumes and repeat dispensing settings with one hand Reduced RSI risk Optimal plunger height and reduced force

Meet SWITCH: the hybrid pipette that does it all Ergonomic plunger requires less force than traditional manual pipettes, and is always positioned at the optimal height Quick set ring enables one-handed volume adjustments and easy setting of repeat dispense parameters Mode switch enables a seamless transition between manual pipetting and repeat dispense mode Ejector and GRIPTIPS® pipette tips provide exceptionally low ejection forces Easy-to-read display with large, clear digits Set-up for manual pipetting, with the mode switch and plunger in the upper position for optimal liquid control Repeat...

The SWITCH is an innovative single channel handheld pipette that is ideal for any task, from precise assays to rapid dispensing into plates and tubes. Due to the light force and low plunger stroke it enables better manual pipetting than standard handheld pipettes, while allowing you to seamlessly shift to repeat dispense mode for efficient aliquoting. When used manually, it offers: • The simplicity and familiar feel of a traditional mechanical pipette • Thumb-operated speed control for precise aspiration and dispensing • Quick set ring for rapid volume adjustments • Rapid dispensing of multiple...

Reduced RSI risk The SWITCH is designed with ergonomics in mind, boasting a light plunger force, an ideal plunger height, easy one-handed operation and best-in-class pipette tips. Low plunger strength and height A study on ergonomic pipetting by Carolin Heitz, Head of the Workplace Ergonomics Department at Zurich University of Applied Sciences (ZHAW), emphasized the importance of maintaining a neutral thumb position and avoiding extreme joint angles during repetitive pipetting tasks. It also highlighted that operating mechanisms – like pipette plungers – should require as little force as possible...

A truly user-friendly design for comfortable, effortless pipetting The SWITCH comes with an intuitive design that supports both manual operation and repeat dispensing. Whether adjusting volumes by hand or setting up for rapid aliquoting, users benefit from a clear interface and simple controls that make pipetting feel effortless – right from the start. This overcomes the complexity and steep learning curve often associated with electronic pipettes. Quick manual volume adjustments Easily determine unknown volumes The quick set ring enables rapid volume adjustments: simply The SWITCH offers the...

A pipette that works all day, every day A common concern with electronic pipettes is the risk of the battery dying unexpectedly, disrupting workflows. The SWITCH addresses this problem with a long-lasting battery specifically designed to support at least a full day’s work. In the unlikely event that the pipette does run out of battery, it can be charged during use via the USB-C port on the handle, allowing you to carry on working without interruption. The SWITCH also features a charging contact on the finger hook that enables it to be charged on a Flex charging stand. Flex charging stand: a flexible...

SWITCH* Hybrid pipette, 1 channel, 0.2 - 2 pi 2011 Hybrid pipette, 1 channel, 1 - 10 pi 2012 Hybrid pipette, 1 channel, 2 - 20 pi 2013 Hybrid pipette, 1 channel, 10 - 100 pi 2015 Hybrid pipette, 1 channel, 20 - 200 pl 2016 Hybrid pipette, 1 channel, 100 - 1,000 pl 2018 •Instrument does not include a mains adapter, please choose your desired charging option below Starter pack 3 pipettes with nominal volumes 20, 200 and 1,000 pl + 1 Flex charging stand Storage and charging options Part no. Wall mount for handheld pipettes 3205 Short linear stand 3214 Flex charging stand, US, JP version, IEC type...