Catalogs >
INTEGI >
M2

M2
5Pages

Catalog excerpts

M2 Instruction manual 1. TOOLS PARTS ITEMS INCLUDED Knurl bearing reel *This item is not sold individually 2. FEASIBLE PATTERNS The M2 form knurling tool is conceived for knurling on pieces with diameters between 8 and 200 mm. The obtained pattern depends on the knurls used as shown below. KNURLING PROFILE RAA DESCRIPTION Right 30º Cross-knurl Diamond pattern male 45° Cross-knurl Diamond pattern male KNURLING WHEEL AXIAL FEED RADIAL FEED INTEGI, S.A. Autonomia Kalea, 5 - 48250 Zaldibar, Bizkaia – España / +34 943 174 800 - ✉ integi@integi.com /

Open the catalog to page 2

M2 Instruction manual 3. ASSEMBLING THE KNURLING WHEELS First, loosen the C.01 screw and take out the reel. Place the knurls taking into account they need to be paired (BL+BR) according to Drawing 2. When you introduce the pins, the beveled side comes first. Once the knurling wheels are installed and the pins inserted, the reel needs to be placed in the tool and the screw C.01 screwed, neither so tight the reel gets blocked nor so loose the reel rolls too easily. It needs to be tight in a way it can easily be turned with the hand. 4. CLAMPING AND SETTING THE TOOL TO THE MACHINE First, we...

Open the catalog to page 3

M2 Instruction manual 7. BEFORE AND DURING THE WORKING PROCESS     Make sure that the knurl pins are firmly fastened. Check that the knurls run free and lubricate them with graphite grease. Always apply plenty of coolant, lubricant or cutting oil flowing in order to sweep the swarf away. The working direction, longitudinal advance, will always be against the tool. 8. TROUBLE SHOOTING PROBLEM CAUSE Too slow radial feed at the beginning of the knurling Double knurling SOLUTION Increase radial feed at the beginning of the knurling* Turn a diameter that makes the perimeter The perimeter of...

Open the catalog to page 4