CAS 125-HR
2Pages

{{requestButtons}}

Catalog excerpts

CAS 125-HR - 1

DATA SHEET \\ CAS 125-HR /^Systems KONICA MINOLTA Group CAS 125-HR High speed high resolution array spectrometer Key features at a glance Y Ultra high optical resolution down to 0.09 nm (FWHM) Y Very short integration times down to 10 ps Y 4096 pixels CMOS sensor with thermal stabilization Y Recipe mode for ultrafast measurement sequences Y Max. scan rate of 1900 scans/s The CAS 125-HR extends the CAS 125 series of spectroradiometers from Instrument Systems for applications that require enhanced spectral resolution. The CAS 125-HR is well suited for wavelength characterization of narrow band emitters, e.g. laser diodes or monochromatic light sources. The novel recipe mode significantly increases productivity in time-critical high-throughput application. \\ VERY HIGH SPECTRAL RESOLUTION Depending on the configuration of the CAS 125-HR spectrometer ultra high optical resolution down to 0.09 nm (FWHM) is possible at a data point interval of 0.023 nm. The design of the industry proven crossed Czerny-Turner spectrograph guarantees maximum optical precision. \\ VERSATILE IN APPLICATION Unique technical innovations integrated in the CAS 125 result in a higher level of reliability and speed. A thermal stabilization of the sensor ensures independent operation from changing environmental conditions. The economic design with a robust housing and smaller footprint is specially designed for the demanding conditions experienced in 24/7 operation. The new CAS 125 satisfies the high requirements on accuracy and versatiltiy from high-volume production applications to diverse laboratory tasks. \\ EXTENSIVE SOFT- & HARDWARE PACKAGE The CAS 125 is equipped with Ethernet interface and hardware trigger. The integrated density filter wheel and the dark-current shutter additionally facilitate fully automated measurements over an extremely broad detector signal range. A software development kit (SDK) with DLL driver allows fast and easy integration of the CAS 125 into production environment. In addition, SpecWin Pro and SpecWin Light provide an extensive range of spectral analysis tools and hardware interfaces for diverse laboratory tasks. \\ ULTRAFAST MEASUREMENT SEQUENCES The SDK enables the merging of several thousand measurements into combined recipes, which are loaded onto the CAS 125-HR upon execution. The subsequent measurements are carried out step-by-step in an hardware-triggered mode avoiding long communication times with the computer between successive measurements. In this way, several thousands of measurements can be carried with minimum delay time, which drastically enhances the units-per-hour in production environments. The software module MultiTrack allows maximum scan rates of up to 1900 scan/s, ideal suited for investigation of short optical phenomena, e.g. warm up behavior of LEDs or laser diodes.

Open the catalog to page 1
CAS 125-HR - 2

Instrument Systems KONICA MINOLTA Group \\ TECHNICAL SPECIFICATIONS CAS 125-HR High Resolution Array Spectrometer Instrument Systems is continually working to develop and improve its products. Technical changes, errors or misprints do not constitute grounds for compensation. The company’s terms of delivery and payment apply in all other respects. 1) Sensor with thermal stabilization 2) Depends on integration time, device settings and performance of operating computer / system. 3) Single acquisition with 1ms integration time. 4) Applies to a signal-to-noise ratio of 10:1. Measured with...

Open the catalog to page 2

All Instrument Systems catalogs and technical brochures

  1. VTC 2400

    2 Pages

  2. Photometers

    24 Pages

  3. LEDGON 100

    4 Pages