Catalogs >
Instron >
Torsion Add-On for Electromechanical Systems

Torsion Add-On for Electromechanical Systems
1 / 4Pages

Catalog excerpts

Torsion Add-On for Electromechanical Systems - 1

TORSION ADD-ON 3.0 For Electromechanical Systems Simple axial-torsion testing is often required for the complete evaluation of many pharmaceutical and surgical products, electronic components, consumer products, and packaging. Across all industries, the development of new products and materials demands stringent standard-based and functional testing with a need for increased capability in testing equipment. Some of these standards, such as ISO 80369 for luer connectors, include both axial and torsional test requirements. The Instron® Torsion Add-On 3.0 for Electromechanical Universal Testing Systems is designed for simple, simultaneous axial and torsional testing of devices and/or components. Torsion Add-On 3.0 easily mounts to any new or existing Instron 6800 or 5900 system, adding torsion capability to your lab while saving valuable lab space. It utilizes Bluehill Universal’s dedicated axial-torsion and method types in a user-friendly and intuitive interface. FEATURES AND BENEFITS • Saves lab space by combining axial and torsional capabilities into a single system • Compatible with existing fixtures • Easily mounts to new and existing Instron frames • Uses Bluehill Universal software with TestProfiler • Integrated with 6800 Series handset for safe and ergonomic operation • Compatible with Bluehill’s large library of calculations • Meets requirements of ASTM F543, ISO 11040, ISO 80369, and other testing standards • Performs unlimited rotations • Requires minimal operator training • Compatible with Bluehill Universal Traceability Module to meet 21 CFR Part 11 compliance • IQ/OQ documentation available • Supported b

Open the catalog to page 1

Torsion Add-On for Electromechanical Systems - 2

Torsion Add-On 3.0 | For Electromechanical Systems APPLICATION RANGE Torsion Add-On 3.0 provides more advanced test controls to evaluate components from a wide range of industries including biomedical, electronics, consumer packaging, and automotive. Usability Testing of Pen Injector Low-Torque Testing of Luer Connections to ISO 80369 Bone Screw Testing to ASTM F543 Torsional Testing of HDMI Cable Cyclic Testing of a Flexible Display Product Development of Consumer Packaging

Open the catalog to page 2

Torsion Add-On for Electromechanical Systems - 3

Torsion Add-On 3.0 | For Electromechanical Systems 6800 HANDSET OPERATION Torsion Add-On 3.0 integrates with the 6800 handset for ergonomic and safe control at the frame, preventing unintended motion of the crosshead. RETURN TO ZERO Easily return to zero rotation using the unlock and return buttons on the handset. ROTATE TO ANGLE To rotate to a specific location, enter desired angle into Bluehill Universal and simultaneously press the unlock and return buttons on the handset. MOTORIZED JOG Use the handset jog button to rotate the motor in a clockwise or counterclockwise direction. Arrows on...

Open the catalog to page 3

Torsion Add-On for Electromechanical Systems - 4

Torsion Add-On 3.0 | For Electromechanical Systems AXIAL/TORSION SPECIFICATIONS Torsion Add-On 3.0 provides up to 20 Nm of torsional capacity. The axial load capacity is dependent on the testing system used. Please refer to the Axial System Specifications table below for more information. TORSION SPECIFICATIONS Torque Capacity Angular Resolution Maximum Rotation Speed Minimum Rotation Speed Operating Temperature Electrical Requirements AXIAL SPECIFICATIONS Model Number BIAXIAL LOAD CELL CAPACITIES Axial Load Capacity Catalog Number Axial Capacity Torque Capacity Notes: 1. Custom top plate...

Open the catalog to page 4