±1 kN Pneumatic Fatigue-Rated Wedge Action Grips 2742-103 Designed to suit ElectroPuls™ test instruments, the 2742-103 pneumatic wedge action grips are suitable for tension, compression and reverse-stress testing on a wide range of specimens and materials. The grips are pneumatically operated directly from the machine handset and the open-fronted design provides easy specimen insertion, positioning and clamping. Features and Benefits • Dynamic Linear Capacity: ±1 kN (±225 lbf) • Independent upper and lower jaw faces opening and closing via the handset • Enhanced usability thanks to software feedback of grip status • Enhanced control and repeatability of specimen gripping • Suitable for tension and compression, including full reverse-stress dynamic testing • Open-fronted design for quick and easy specimen insertion from the front • Self-tightening, moving body wedge design eliminates slippage and prevents specimen loading • Interchangeable jaw faces for gripping different materials and specimen geometries and sizes Application Range • Types of loading: Tension, compression or reverse-stress testing • Specimen geometries: Flat or round specimens • Specimen material: Metallics, plastics, composites, biomaterials • Temperature range: +10 to +38°C (50 to 100°F) The open front design permits quick and easy changing of specimens and jaw faces. Jaw faces optimize gripping performance whilst the serrated faces are designed to minimize damage to the specimen surface. Accessories for Materials Testing The single-acting wedge action principle of these grips is designed to clamp a specimen without applying a compressive load, which could cause a specimen to buckle. The retracting movement of the grip bodies helps to reduce compressive loads that are normally cau

Catalog Number Maximum Force Capacity C Grip Mass Compatible Accessories Catalog Number Pneumatic Air Kit for ElectroPuls Test F Jaw Faces Catalog Number Specimen Size Note: Jaw face catalog number provides four faces O73 Jaw faces are hardened to 48Rc to 52Rc, unless otherwise specified All faces are diamond serrated 45° I THIRD ANGLE Flat Serrated Jaw Faces G I MATERIAL: All items must be compliant SEE NOTES with RoHS Directive ±0,5 ±0,25 ±0,15 HEAT TREAT: ±0,5 DEG' SEE NOTES THIRD ANGLE SEE NOTES SURFACE TEXTURE Ra 1,6 m UNLESS OTHERWISE STATED TOLERANCES UNLESS OTHERWISE SPECIFIED Proprietary...