ElectroPuls™ E1000 All-Electric Dynamic Test Instrument The ElectroPulsTM E1000 is a state-of-the-art, all-electric test instrument designed for dynamic and static testing on a wide range of materials and components. It includes Instron® advanced digital control electronics, DynacellTM load cell, Console software, and the very latest in testing technology – hassle-free tuning based on specimen stiffness, electrically operated crosshead lifts, a T-slot table for flexible test set ups, and a host of other user-orientated features. Powered from a single-phase supply it requires no additional utilities for basic machine operation (for example, pneumatic air, hydraulics, or water). Features • Patented, oil-free linear motor technology for clean conditions • Designed for both dynamic and static testing on a variety of materials and components • System status indicator shows system conditions (off, on, emergency stop, and fault) Hidden Technology Designed to Improve Your Test • High dynamic performance, capable of operating at over 100 Hz • Patented stiffness-based loop tuning system • ±1000 N dynamic load capacity and ±710 N static load capacity • Unique actuator bearing system maintains load string alignment when offset or lateral loads are induced by specimens or fixtures • Temperature-controlled air-cooling system • High-stiffness, precision-aligned twin column load frame with actuator in upper crosshead • Versatile T-slot table for regular and irregular grips and specimens • Compact instrument - frame requires less than 0.15 m² (1.6 ft²) of desk space Hardware and Software Interfaces Designed to Put You in Control • Console software control interface engineered with Instron’s knowledge of machine usability • Rigidly mounted control pod with critical controls and emergency stop at your fingertips • Optional hardware panel for use when full computer functionality is not required • Electrically powered crosshead lift system with manual lever clamps for ease of test space adjustment www.instron.com • An optical encoder for precise digital extension control and a dedicated position channel for set up and end of test • Digital controller based on the industry’s most advanced controller • Dynacell advanced load cell technology for faster testing and reduction of inertial errors A High Level of Versatility • Readily adjustable test space to suit a wide variety of specimens, grips, fixtures, and accessories • 60 mm (2.36 in) stroke for a wide range of tests, as well as ease of specimen set up • Offset diagonal coloumn configuration provides optimum access to the test area • Compatible with WaveMatrixTM, Bluehill® 2 and Application Specific software • Compatible with a large range of grips, fixtures, chambers, saline baths, video extensometers, and other accessories • Optional accessory kit to allow frame to be mounted in horizontal orientation for ease of testing with imaging systems and microscopes Products for Materials Testing • Electrically powered from single phase main supply, no need for hydraulic or pneumatic air supplies

ElectroPuls™ | E1000 All-Electric Dynamic Test Instrument Specifications Dynamic Capacity Static Capacity Stroke Load Weighing Accuracy Daylight Opening ±1000 N (±225 lbf) ±710 N (±160 lbf) 60 mm (2.36 in) ±0.5 % of indicated load or ±0.005 % of load cell capacity (1-100%), whichever is greater 610 mm (24 in) maximum with actuator at mid stroke Configuration Diagonal twin-column with actuator in upper crosshead Mounting Tabletop: Vertical (Horizontal with optional mounting kit) Lift and Locks Load Cell Weight Electrical Supply Cooling Operating Temperature Electrically powered lifts with manual...