ElectroPuls® All Electric Dynamic Test Systems

All Electric Dynamic Test Systems 02

Since 2007, running tests over billions of cycles, ElectroPuls systems are the established materials testing machines using patented linear motor technology. With model capacities up to 20 kN, ElectroPuls systems offer slow-speed static testing and high-frequency dynamic fatigue testing with hundreds of hertz capability. The Linear-Torsion models feature a patented actuator for bi-axial tests on materials and components. With only an electrical connection to the wall, ElectroPuls systems are dynamic testing machines of the future that do not have the environmental impact of conventional servohydraulic...

A SYSTEM TO SUIT YOUR NEEDS ElectroPuls The ElectroPuls family includes systems ranging from 1,000 N up to 20,000 N. The Linear-Torsion models feature a patented actuator in the upper crosshead and a bi-axial Dynacell™ load cell. E1000 Tabletop Instrument | Force Capacity ±1,000 N Shown fitted with a short-height 600 series Environmental Chamber for low and high-temperature testing. Common applications include: Soft tissue samples, very small specimens, auto-injector devices E3000 Tabletop Instrument | Force Capacity ±3,000 N Common applications include: Testing components and biomedical implants...

E10000 Floor Instrument | Force Capacity ±10,000 N Common applications include: Cyclic testing on hard plastics, rubbers and medical devices. E10000 Linear-Torsion Floor Instrument | Force Capacity ±10,000 N Torque Capacity ±100 Nm Shown fitted with fatigue-rated pneumatic wedge grips and a CE-certified safety guard for bi-axial fatigue testing. E20000 Floor Instrument | Force Capacity ±20,000 N Common applications include: Fatigue and fracture of small to medium metal or composite specimens. E20000 Linear-Torsion Floor Instrument | Force Capacity ±20,000 N Torque Capacity ±130 Nm Shown fitted...

EXPANDING HORIZONSElectroPuls®ElectroPuls systems allow scientists and researchers to cross new boundaries in the research and development of materials and components technologies. 01 Fatigue Tests of Plastics using non-contacting extensometry 02 3 Point Flexure Fatigue of Small Animal Bone 03 Durability Testing of Hip Implants to ISO 7206 04 Durability Testing of Spinal Constructs to ASTM F1717 05 Simulation Testing of Consumer Electronics 06 Durability Testing of Dental Implants to ISO 14801 07 Durability and Impulse Testing of Athletic Footwear

ALIVE WITH TECHNOLOGY ElectroPuls systems allow scientists and researchers to cross new boundaries in the research and development of materials and components technologies. Innovative Linear Motors - Extensive Dynamic and Static Testing Capability Instron established patented linear motors at the heart of ElectroPuls systems over ten years ago, and has successfully demonstrated its superior technology in tests over billions of cycles. With an ultra-low friction design and powered from only a single-phase electrical supply for systems up to 10 kN and three-phase electrical supply for 20 kN, ElectroPuls...

OPTICAL ENCODER FOR NOISE-FREE DIGITAL CONTROL ElectroPuls systems use optical encoder technologies for precise extension control and a dedicated position channel for set up and end of test. HIGH SYSTEM ACCURACIES GIVE CONFIDENCE IN RESULTS Using precision transducers with the advanced digital controller, ElectroPuls systems ensure the highest accuracy of measurements. This includes a load weighing accuracy of ±0.005% of load cell capacity, or ±0.5% of indicated load. DYNACELL™ - IMPROVED ACCURACY AND FASTER TESTING The Instron advanced fatigue-rated load cell, Dynacell, can reduce inertial errors...

FOOTPRINT - THE CHOICE IS YOURS ElectroPuls Servohydraulic systems have previously been the only choice for lower-force, high-frequency dynamic testing. These systems require a high-pressure hydraulic power supply, three-phase electrical power, a high-flow water supply to cool the pump, and extensive annual maintenance to ensure the system is always performing. Cost of Ownership: Servohydraulic Test System One-Time Costs Capital purchase Installation of utilities On-Going Costs Electrical Power Single-Phase Mains Power Water Cooling Three-Phase Mains Power Water Cooling Supply Floor Space Machine...

Cost of Ownership: ElectroPuls® Test System 01 One-Time Costs Water Cooling Single-Phase Mains Power for Systems up to 10 kN Three-Phase Mains Power for 20 kN Systems On-Going Costs Electrical Power Small Footprint 02 Acoustically Engineered Air Cooling Capital purchase Installation of utilities $$$$$ $$$$$ Floor Space Machine maintenance Hydraulic supply maintenance Disposal of consumables $$$$$ $$$$$ $$$$$ With ease of installation and exceptional low cost of ownership, ElectroPuls systems are the ideal choice for dynamic testing in today’s environmentally-friendly laboratories. These innovative...

TAKE CONTROL ElectroPuls 01 Get Instant Status with System Indicator A quick glimpse at the System Indicator provides instant status whether it’s in Test mode, Setup Mode, or Off. 02 E nsure the Crosshead is Clamped With Status Indicators Clamp status indicators on the E10000 systems help to ensure that the minimum amount of clamping force is applied to the crosshead before starting a test. 03 Adjustable Test Space Without Additional Hassle TWIST the lever clamps, PUSH the button to move the crosshead to the desired position, and then twist the levers to LOCK the crosshead. No tools to lose,...

DYNAMIC STABILITY CONTROLS MANAGE UNEXPECTED EVENTS A Software Interface Designed to Put You in Control ElectroPuls systems feature an intuitive software console that provides instant access to critical control features, limits, tuning, and machine status, and allows users to get tests running in seconds. Safety First: Test Space Access Control ElectroPuls systems can be supplied with a CE-certified safety guard to prevent operator access to the test space when at high power and help minimize damage from flying specimen debris. BREAK DETECT Monitors the system to determine specimen break and...