Catalogs >
Instron >
±10 KN ±100 NM LINEAR-TORSION MECHANICAL WEDGE-ACTION GRIPS

±10 KN ±100 NM LINEAR-TORSION MECHANICAL WEDGE-ACTION GRIPS
2Pages

Catalog excerpts

±10 KN ±100 NM LINEAR-TORSION MECHANICAL WEDGE-ACTION GRIPS - 1

application range • Type of loading: Linear and Torsion tension, compression or reverse-stress testing • Specimen material: Metallics, Plastics, Composites, Biomaterials • Specimen geometries: Flat or round specimens • Temperature range: -70 to +350°C (-94 to 662°F) Designed to suit the ElectroPuls™ E10000 Linear-Torsion, the 2742-316 mechanical wedge-action grips are suitable for tension, compression, reverse-stress, and torsion testing on a wide range of specimens and materials. The grips are mechanically operated and the open-fronted design provides easy specimen insertion, positioning, and clamping. features • Fatigue-rated capacity: ±10 kN (linear), ±100 Nm (torsion) • Suitable for both linear and torsion tension and compression testing, including full reverse-stress dynamic tests • Open-fronted design for quick and easy specimen insertion • Interchangeable jaw faces for gripping different materials and specimen sizes • Requires no attachment kits when mounting to ElectroPuls E10000 Linear-Torsion principle of operation • The single-acting wedge action principle of these grips is designed to clamp a specimen without applying a compressive load, which could cause a specimen to buckle • The retracting movement of the grip bodies helps to reduce compressive loads that are normally caused when clamping specimens • The open front design permits quick and easy changing of specimens and jaw faces. Jaw faces optimize gripping performance whilst the serrated faces are designed to minimize damage to the specimen

Open the catalog to page 1

±10 KN ±100 NM LINEAR-TORSION MECHANICAL WEDGE-ACTION GRIPS - 2

±10 KN ±100 NM linear-torsion mechanical wedge-action grips I 2742-316 2742-316 Linear-Torsion Mechanical Wedge-Action Grips 5.4 kg (11.9 lbs) each 6 x M8 threaded holes on 75 mm PCD -70 to +350°C (-94 to 662°F) Catalogue Number Maximum Capacity A B C Grip Mass Mechanical Interface Operating Temperature Notes: Grip catalogue number provides two grips jaw faces Catalog Specimen Number Thickness Type mm Specimen Thickness in Clamping Area width height fio 01 Notes: 1. Jaw face catalogue number provides four faces Grip Dimensions 2. Jaw faces are hardened to 48 to 52 Rc, unless...

Open the catalog to page 2