1. Catalogs
  2. Instek
  3. PFR-100 Series

PFR-100 Series

PFR-100 Series

PFR-100 Series

Product catalog summary
Specifications Overview
The PFR-100 specifications are applicable after the device has been powered on for at least 30 minutes. The document details specifications for two models: PFR-100L and PFR-100M.

Output Rating
  • PFR-100L: 50V, 10A, 100W
  • PFR-100M: 250V, 2A, 100W

Regulation
  • Constant Voltage (CV) Load Regulation: 10mV (PFR-100L), 33mV (PFR-100M)
  • Line Regulation: 3mV (PFR-100L), 5mV (PFR-100M)
  • Constant Current (CC) Load Regulation: 10mA (PFR-100L), 3.2mA (PFR-100M)
  • Line Regulation: 8mA (PFR-100L), 1.2mA (PFR-100M)

Ripple & Noise
  • Vp-p: 50mV (PFR-100L), 150mV (PFR-100M)
  • Vr.m.s.: 4mV (PFR-100L), 15mV (PFR-100M)
  • A r.m.s.: 10mA (PFR-100L), 2mA (PFR-100M)

Programming and Measurement Accuracy
  • Voltage Programming Accuracy: 0.1% of setting + 40mV (PFR-100L), 200mV (PFR-100M)
  • Current Programming Accuracy: 0.2% of setting + 20mA (PFR-100L), 2mA (PFR-100M)
  • Voltage Measurement Accuracy: 0.1% of reading + 40mV (PFR-100L), 200mV (PFR-100M)
  • Current Measurement Accuracy: 0.2% of reading + 20mA (PFR-100L), 2mA (PFR-100M)

Response Time
  • Rise Time: 50ms (PFR-100L), 1.5ms (PFR-100M)
  • Fall Time: 100ms (PFR-100L), 200ms (PFR-100M)
  • Transient Response Time: 500ms (PFR-100L), 3000ms (PFR-100M)

Protection Functions
  • Over Voltage Protection (OVP): 5~55V (PFR-100L), 5~275V (PFR-100M)
  • Over Current Protection (OCP): 1~11A (PFR-100L), 0.2~2.2A (PFR-100M)
  • Under Voltage Limit (UVL): 0~52.5V (PFR-100L), 0~262.5V (PFR-100M)
  • Over Temperature Protection (OTP) and Low AC Input Protection (AC-Fail): Turns the output off

Environmental Conditions
  • Operating Temperature: 0°C to 40°C
  • Storage Temperature: -20°C to 70°C
  • Operating Humidity: 20% to 80% RH, no condensation
  • Storage Humidity: 20% to 85% RH, no condensation

Other Features
  • Analog Control: Yes
  • Interface: USB, RS-232/RS-485; LAN/GPIB as factory option
  • AC Input: 85~265VAC, 47~63Hz, single phase
  • Dimensions & Weight: 70(W)x124(H)x300(D)mm; Approx. 2.5kg
See more

Catalog excerpts

PFR-100 Series-1

GOOD WILL INSTRUMENT CO., LTD. NO. 7-1, Jhongsing Road, Tucheng Dist., New Taipei City, 236, Taiwan T (886) 2 2268-0389 F (886)2 2268-0639 www.gwinstek.com The specifications apply when the PFR-100 is powered on for at least 30 minutes.

 Open the catalog to page 1
PFR-100 Series-2

GOOD WILL INSTRUMENT CO., LTD. NO. 7-1, Jhongsing Road, Tucheng Dist., New Taipei City, 236, Taiwan T (886) 2 2268-0389 F (886)2 2268-0639 www.gwinstek.com Notes: *1: At 85 ~ 132Vac or 170 ~ 265Vac, constant load. *2: From No-load to Full-load, constant input voltage. Measured at the sensing point in Remote Sense. *3: Measure with JEITA RC-9131B (1:1) probe *4: Measurement frequency bandwidth is 10Hz to 20MHz. *5: Measurement frequency bandwidth is 5Hz to 1MHz. *6: From 10%~90% of rated output voltage, with rated resistive load. *7: From 90%~10% of rated output voltage, with rated resistive load....

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.