ASR-3000 Series

Product catalog summary

Introduction
The ASR-3000 series specifications detail the operational parameters and features of the ASR-3200, ASR-3300, and ASR-3400 models. These specifications are applicable when the device is powered on for at least 30 minutes within a temperature range of +20°C to +30°C.

Input Ratings
All models operate with a nominal input voltage of 200 Vac to 240 Vac, with an input voltage range of 180 Vac to 264 Vac. They support single-phase, two-wire configurations with a nominal frequency of 50 Hz to 60 Hz. Maximum power consumption varies by model: ASR-3200 at 2500 VA, ASR-3300 at 3750 VA, and ASR-3400 at 5000 VA.

AC Mode Output Ratings
The voltage setting range is 0.0 V to 200.0 V / 0.0 V to 400.0 V with a resolution of 0.1 V. Maximum current output varies by model and voltage, with ASR-3200 providing up to 20 A at 100 V and 10 A at 200 V. The frequency setting range is 40.0 Hz to 999.9 Hz in AC mode and 1 Hz to 999.9 Hz in AC+DC mode.

DC Mode Output Ratings
Voltage settings range from -285 V to +285 V / -570 V to +570 V with a resolution of 0.1 V. Maximum current output is similar to AC mode, with ASR-3200 providing up to 20 A at 100 V and 10 A at 200 V.

Output Voltage Stability
Line regulation is 0.2% or less, and load regulation is 0.5% or less. Ripple noise is specified at 1 Vrms / 2 Vrms.

Waveform Distortion and Efficiency
Total harmonic distortion is ≤ 0.2% at 50/60Hz, ≤ 0.3% below 500Hz, and ≤ 0.5% from 500.1Hz to 999.9Hz. Efficiency is 80% or more.

Measured Value Display
Voltage and current measurements include RMS and AVG values with specific accuracies. Power measurements include active, apparent, and reactive power with defined resolutions and accuracies.

Other Features
Protection features include UVP, OCP, OTP, OPP, and fan failure detection. The display is a 4.3-inch TFT-LCD. Memory functions allow storing and recalling settings, with 16 nonvolatile memory slots for arbitrary waveforms.

General Specifications
Interfaces include USB, LAN, RS-232C, and GPIB. The device complies with various EMC and safety standards, including EN 61010-1. Operating conditions specify indoor use with an operating temperature range of 0 °C to 40 °C and a storage range of -10 °C to 70 °C.

Physical Characteristics
The dimensions are 430(W)×176(H)×550(D) mm, and the weight is approximately 25 kg for each model. Accessories include safety information, a CD-ROM, input/output cover, EIA rack mount, and a USB cable.

Catalog excerpts

GOOD WILL INSTRUMENT CO., LTD. NO. 7-1, Jhongsing Road, Tucheng Dist., New Taipei City, 236, Taiwan T (886) 2 2268-0389 F (886)2 2268-0639 www.gwinstek.com 1. 100 V / 200 V range *2. For an output voltage of 20 V to 200 V / 40 V to 400 V, an output frequency of 45 Hz to 65 Hz, no load, and 23°C ± 5°C *3. For an output voltage of 1 V to 100 V / 2 V to 200 V. Limited by the power capacity when the output voltage is 100 V to 200 V / 200 V to 400 V. If there is the DC superimposition, the current of AC+DC mode satisfies the maximum current. In the case of lower than 40 Hz, and the power rating temperature, the maximum current will be decrease. *4. With respect to the capacitor-input rectifying load. Limited by the maximum current. *5. For 45 Hz to 65 Hz, the rated output voltage, no load and the resistance load for the maximum current, and the operating temperature. *6. In the case of the AC mode and 23°C ± 5°C.

Open the catalog to page 1

Gw inSTEK Output rating for DC mode GOOD WILL INSTRUMENT CO., LTD. NO. 7-1, Jhongsing Road, Tucheng Dist., New Taipei City, 236, Taiwan T (886) 2 2268-0389 F (886)2 2268-0639 www.gwinstek.com

Open the catalog to page 2

GOOD WILL INSTRUMENT CO., LTD. NO. 7-1, Jhongsing Road, Tucheng Dist., New Taipei City, 236, Taiwan T (886) 2 2268-0389 F (886)2 2268-0639 www.gwinstek.com

Open the catalog to page 3

GOOD WILL INSTRUMENT CO., LTD. NO. 7-1, Jhongsing Road, Tucheng Dist., New Taipei City, 236, Taiwan T (886) 2 2268-0389 F (886)2 2268-0639 www.gwinstek.com A value with the accuracy is the guaranteed value of the specification. However, an accuracy noted as reference value shows the supplemental data for reference when the product is used, and is not under the guarantee. A value without the accuracy is the nominal value or representative value (shown as typ.).

Open the catalog to page 4

All Instek catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list