Opti-Scan 350.10
2Pages

Specification and scope of supply Opti-Scan 350.10 Description Max Single scan area Max Single scan depth * 1,2 & 3 Volumetric accuracy** Repeatability** Point Spacing Scanning speed*** Scanning time*** 15 microns 10 microns Better than 75 microns > 250,000 points per second. < 10 seconds (single scan) Processing time**** Peripheral equipment Recommended Operating System Table lighting controller, Standard Computer Interface Windows 11 64bit Software included: 3D scanning, automated repositioning, texture map acquisition, 3D color rendering, creation of cross-sections, creation of 3D edges, reverse engineering of 3D edges to DXF/DWG, comparison of 3D edges to DXF/DWG, reverse projection of colored deviation reports onto part, creation of 3D point clouds in PLY, STL, VRML, ASCII formats, creation of texture mapped point clouds, calibration software. Free 3D Inspection Software: Advanced 3D inspection software option (Geomagic Control) Fully compatible with off the shelf free 3D inspection software. Functionality includes comparison to 3D solid models, dimensioning, GD&T, cross-sections, full surface deviation inspection, merging of scans, customizable reports, automatic alignment of scan to CAD, point cloud meshing, processing and filtering, extraction of nominal data from CAD model, comparison of 2 scans. 3D reverse engineering (advanced package) Available on request. Comparison to 3D solid models, GD&T, SPC, cross-sections, full surface and edge inspection, creation of report templates, automated merging of point clouds, automatic alignment of scan to CAD, automatic point cloud processing and filtering, automatic detection or repositioning spheres, macro creation for full automation, automatic extraction of nominal data from CAD model, comparison of 2 scans. Available on request. Creation of 3D solid models from scan data. Calibration Kit Accuracy Verification Object Included as standard, retro-reflective reference markers mounted onto steel plate with repositioning frame Included as standard, calibrated hardened steel ball bar OptiScan construction Camera and projector assemblies mounted in a internal aluminium subframe, housed in a integral moulded enclosure made from ABS (Carbon fibre effect). OptiScan enclosure Welded steel base frame complete with pivoting sub frame, enclosed edge lit lighting table, Motorised rotational disc mounted on high load Xirodur polymer bearings and linear actuators for vertical tiling motion. Complete machine enclosed in removable canopy, constructed of aluminium with acrylic outer panels. Automated turn-table maximum load (UDL) Camera Projection source Data cables 20kg >20 megapixels. Full HD 1080p 1920x1080 native resolution LED projector. HDMI and USB3 Power supply Power consumption 110-240V 50/60Hz 2 Amp maximum at 230 Volt, 4 Amp max at 110 Volt. EC directives Paint colour Ambient operating conditions Compliant with Machinery, Low voltage and EMC Directives. Frame and Outer canopy: RAL5013 Blue 5-35 degree C Available configurations L= Light Table E = Enclosure A = Automatic Repositioning disc M = Manual Repositioning disc AA = Automatic repositioning disc & tilt mechanism Approx Footprint width/ depth/ height/ weight (OS350.10 Scanning Head Only) Approx Footprint width/ depth/ height/ weight (OS350.10 – Standalone Tripod Option) Approx Footprint width/ depth/ height/ weight (OS350.10 LEAA) Standard packing Export crate suitable for sea shipping Warranty Optional extended warranty Software support option One year limited warranty on hardware and software Two or three year extended warranty (requires software upgrade option) Annual support contract provides free software upgrades 1 Larger parts can be measured with multiple scans 2 Other sizes are available on request, exact dimensions may vary by slightly depending on setup. 3 Other accuracies are available on request *Actual scanning range will be significantly larger, however measurements outside of this range may have additional noise. **Accuracy achieved by measuring a reference object at various locations within the measuring volume, contact InspecVision for further details. ***Time taken to measure a typical component. Results may vary depending on part measured or speed of computer ****Time taken to process the measurements of a typical component. Results may vary depending on part measured or speed of computer. Actual measuring accuracies achieved will depend on operating environment, user input, quality and condition of materials Due to our policy of continuous improvement specifications are subject to change without notice, please contact factory or your InspecVision dealer Non-standard hardware, software or acceptance tests must be defined prior to purchase Distributor Details: InspecVision Ltd 10 Trench Road Mallusk Co Antrim BT36 4TY United Kingdom Telephone: