Opti-Scan 1000.35
2Pages

Specification and scope of supply of Opti-Scan 1000.35 Description Max Single scan area Max Single scan depth* 1,2 & 3 Volumetric accuracy** Repeatability** Point Spacing Scanning speed*** Scanning time*** Processing time**** 35 microns Better than 210 microns > 250,000 points per second. < 10 seconds < 5 seconds Peripheral equipment Recommended Operating System USB lighting controller, Standard Computer Interface Windows 11 64bit Software included: 3D scanning, automated repositioning, texture map acquisition, 3D color rendering, creation of cross-sections, creation of 3D edges, reverse engineering of 3D edges to DXF/DWG, comparison of 3D edges to DXF/DWG, reverse projection of colored deviation reports onto part, creation of 3D point clouds in PLY, STL, VRML, ASCII formats, creation of texture mapped point clouds, calibration software. Free 3D Inspection Software: Advanced 3D inspection software option (Geomagic Control) Fully compatible with off the shelf free 3D inspection software. Functionality includes comparison to 3D solid models, dimensioning, GD&T, cross-sections, full surface deviation inspection, merging of scans, customizable reports, automatic alignment of scan to CAD, point cloud meshing, processing and filtering, extraction of nominal data from CAD model, comparison of 2 scans. Available on request. Comparison to 3D solid models, GD&T, SPC, cross-sections, full surface and edge inspection, creation of report templates, automated merging of point clouds, automatic alignment of scan to CAD, automatic point cloud processing and filtering, automatic detection or repositioning spheres, macro creation for full automation, automatic extraction of nominal data from CAD model, comparison of 2 scans. 3D reverse engineering (advanced package) Available on request. Creation of 3D solid models from scan data. Included as standard, retro-reflective reference markers mounted onto steel plate with repositioning frame Accuracy Verification Object Included as standard, calibrated ball bar OptiScan construction Heavy duty aluminium tripod, dolly base. Camera and projector assemblies mounted on floating carbon fibre chassis OptiScan enclosure ABS Carbon fibre effect Repositioning markers Set of 24 loose magnetic photogrammetric markers to allow repositioning Optional light table Optional light table for improved edge measuring accuracy. Manual or automatic component repositioning disc options Automated turn-table maximum load (UDL) Camera Projection source LED/laser projector. Data cables Air supply hose Air flow Air pressure Air quality The air supply for the air bearing can come from a small compressor if no factory air supply is available. The compressor should have a minimum receiver capacity of 24 litres. The air supply hose should be 3/8 inch bore to be a push fit onto a brass tail pipe connection. Air flow – 4.5 to 5.0 CFM @ 100psi FAD (Free Air Delivery) Air pressure input range – 110psi to 140psi (approx 7.5 to 8 bar). Air quality – clean, dry, oil-free air. Power supply Power consumption 110-240V 50/60Hz 1.5 Amp maximum at 230 Volt, 3 Amp max at 110 Volt. Compliant with Machinery, Low voltage and EMC Directives. Paint colour (powder paint) Ambient operating conditions Tripod and Dolly RAL 9005: Black Light table RAL 5013 (colbalt blue) 5-35 degree C Available configurations LA= Light Table Automatic Repositioning disc LM = Light Table Manual Repositioning disc or tripod Approx Footprint width/ depth/ height/ weight Approx Footprint width/ depth/ height/ weight Standard packing 1124mm (W) x 791mm (D) x 1574mm (H) <45kgs (Tripod) 3154mm (W) x 1469mm (D) x 2005mm (H) <1000kgs (LM & LA) Export crate suitable for sea shipping Warranty Optional extended warranty One year limited warranty on hardware and software Two or three year extended warranty (requires software upgrade option) Software support option Annual support contract provides free software upgrades 1 Larger parts can be measured with multiple scans 2 Other sizes are available on request, exact dimensions may vary by slightly depending on setup. 3 Other accuracies are available on request *Actual scanning range will be significantly larger, however measurements outside of this range may have additional noise. **Accuracy achieved by measuring a reference object at various locations within the measuring volume, contact InspecVision for further details. ***Time taken to measure a typical component. Results may vary depending on part measured or speed of computer ****Time taken to process the measurements of a typical component. Results may vary depending on part measured or speed of computer. Actual measuring accuracies achieved will depend on operating environment, user input, quality and condition of materials Due to our policy of continuous improvement specifications are subject to change without notice, please contact factory or your InspecVision dealer Non-standard hardware, software or acceptance tests must be defined prior to purchase Distributor Details: InspecVision Ltd 10 Trench Road Mallusk Co Antrim BT36 4TY United Kingdom Telephone:

Standalone Opti-Scan 1000.35 Schematic