SELF-CLINCHING FLUSH HEAD STUDS - IPFH
1 / 1 PageView full catalog
SELF-CLINCHING FLUSH HEAD STUDS - IPFH
Product catalog summary
Specifications:
The document provides detailed specifications for self-clinching flush head studs, identified by thread and pitch sizes. Key parameters include diameter (D), maximum height (H Max), minimum sheet thickness, hole size, and minimum distance to the edge of the sheet. For example, an M3 x 0.5 stud has a diameter of 4.6 mm, a maximum height of 2.1 mm, and requires a minimum sheet thickness of 1.0 mm.
Standard Lengths:
The document lists standard lengths for each thread and pitch size. For instance, M3 studs are available in lengths ranging from 6 mm to 30 mm, while M8 studs range from 10 mm to 40 mm.
Material Hardness Limitations:
The installation of self-clinching studs is subject to material hardness limitations. Steel clinch studs should not exceed 80 HRB, 300 series stainless steel studs should not exceed 70 HRB, 400 series stainless steel studs should not exceed 92 HRB (requiring a special anvil for proper installation), and aluminum studs should not exceed 50 HRB.
Contact Information:
For further inquiries, contact details are provided: Tel.: +33 (0)2 41 22 99 20, Fax: +33 (0)2 41 88 14 86, Website: www.inserco.eu.
The document provides detailed specifications for self-clinching flush head studs, identified by thread and pitch sizes. Key parameters include diameter (D), maximum height (H Max), minimum sheet thickness, hole size, and minimum distance to the edge of the sheet. For example, an M3 x 0.5 stud has a diameter of 4.6 mm, a maximum height of 2.1 mm, and requires a minimum sheet thickness of 1.0 mm.
Standard Lengths:
The document lists standard lengths for each thread and pitch size. For instance, M3 studs are available in lengths ranging from 6 mm to 30 mm, while M8 studs range from 10 mm to 40 mm.
Material Hardness Limitations:
The installation of self-clinching studs is subject to material hardness limitations. Steel clinch studs should not exceed 80 HRB, 300 series stainless steel studs should not exceed 70 HRB, 400 series stainless steel studs should not exceed 92 HRB (requiring a special anvil for proper installation), and aluminum studs should not exceed 50 HRB.
Contact Information:
For further inquiries, contact details are provided: Tel.: +33 (0)2 41 22 99 20, Fax: +33 (0)2 41 88 14 86, Website: www.inserco.eu.
See more
Catalog excerpts
The following installation panel material hardness limitations apply when installing Self Clinching Studs. Steel Clinch Studs: 80 HRB Max, 300 Series Stainless Steel Clinch Studs: 70 HRB Max, 400 Series Stainless Steel Clinch Studs: 92 HRB Max (A special anvil is recommended for a proper installation), Aluminum Clinch Studs: 50 HRB Max. IPFH Hole Size + 0.08 - 0.00 Min Distance to edge of Sheet STANDARDS LENGTHS THREAD AND PITCH SELF-CLINCHING FLUSH HEAD STUDS – IPFH SELF-CLINCHING FLUSH HEAD STUDS- I
Open the catalog to page 1All INSERCO catalogs and technical brochures
SYMMETRIC INSERT-ITEC1 Page
Products2 Pages
Clinch Nut1 Page
Self-tapping Inserts1 Page
Ultrasonic Inserts1 Page
mico-screws2 Pages
anti-seize2 Pages
locking by bonding2 Pages
sealing2 Pages
general documentation3 Pages
IPLK Expansion Inserts1 Page
ISCBR2 Pages
ICBFH2 Pages
IPCBR2 Pages
ITEC Symmetric Insert1 Page
IFL/IFLH Press Inserts1 Page
IHL/IHLH1 Page
Blind Inserts - IFTC1 Page
IN41/IN42/IN42R1 Page
IPFHL1 Page
IHPFH1 Page
IPTSO1 Page
IPBSO1 Page
IARB1 Page
IMINARB1 Page
IPS1 Page
Archived catalogs
Fasteners For Plastics1 Page
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.