LECOR / LMRE - INDUSTRIAL 27 LECOR / LMRE - PHARMACEUTICS INDUSTRY 31 mixers - emulsifiers TURBINE 35 SUPPORT PIECES AND ELEVATORS 54

Vertical agitators MD and MDN direct motor vertical agitators are designed to prepare reagents in small volume vessels. The main characteristics of these agitators is that they are basic, very compact and lightweight but with high performance, making them ideal to attach directly on HDPE vessels. The connection system between the motor and the shaft using a coupling sleeve makes maintenance tasks easier. The interchangeability of the agitating components makes these units highly versatile and adaptable to different agitating requirements. The MD and MDN units can be used to make dilutions, dissolutions,...

inoxMIMgrup, sl DIMENSIONS AND CHARACTERISTICS OF THE MD AND MDN MODELS IEC FLANGE AGITATOR BASE OVERALL DIMENSIONS MD/MDN.EN_04/18 INOXMIMGRUP S.L. reserves the right to modify this information without prior notice.

Vertical agitators Within the wide range of vertical agitators, INOXMIM has developed SB, SBR and SBN portable agitators to provide a high level of agitating in small volume vessels. Thanks to their compact design and simple clamp anchoring system, they are ideal for agitating open vessels, dispersing reagents and powders, and maintaining mixes. The bolstering tower extends the working life of the motor, increasing its resistance and allowing a longer shaft length. The agitator fitted in these models means they can be widely used in the water treatment, chemical, food, pharmaceutical and cosmetics...

DN 50 FLANGE AGITATOR BASE OVERALL DIMENSIONS INOXMIMGRUP S.L. reserves the right to modify this information without prior notice.

Vertical agitators In order to satisfy the extensive requirements of the agitating and mixing field, INOXMIM has designed VAI, VSI, VDI and VSIN vertical agitators, which are ideal for preparing reagents. The main characteristic of these units is their bolstering tower system, which significantly extends the working life of the motor and allows a longer shaft. This system is fitted with a semi-shaft which transmits the traction generated by the motor to the shaft. This, along with the lip seal guiding system in the tower, guarantees the robustness of the unit and its high agitating capacity....

OVERALL DIMENSIONS AND CHARACTERISTICS OF THE VAI, VSI AND VDI MODELS OVERALL DIMENSIONS VAI-VSI-VDI-VSIN.EN_05/18 INOXMIMGRUP S.L. reserves the right to modify this information without prior notice.

Vertical agitators Within its wide range of vertical agitators, INOXMIM has designed the VMD and VMR agitators to satisfy agitating and homogenisation requirements in medium volume vessels (2000-1 5,000 litres). VMD and VMR agitators are fitted with a lip sealing system which, along with the bolstering tower and semi-shaft transmission, provide high agitating performance and capacity and also extend the working life of the unit. Their characteristics mean a wide variety of impeller elements can be used, working with high viscosity products which tend to form lumps or which are difficult to mix....

FLANGE AGITATOR BASE OVERALL DIMENSIONS INOXMIMGRUP S.L. reserves the right to modify this information without prior notice.

Vertical Agitator IBC vertical agitators are widely used in pharmaceutics industry because of their high performance and efficient agitation plus their low cost. The high versatility of these agitators comes from the different sizes, the range of impeller types and the coaxial geared-motor, which has a wide range of selectable speeds. APPLICATIONS The IBC design changes in line with agitation characteristics and application requirements, with one or more impellers of the same or different kinds being used to provide the agitation required for each system. The level of finish and the design of...

DIMENSIONS AND CHARACTERISTICS OF IBC MODEL ANCHOR FLANGE IEC TYPE SQUARE PLATE ANCHOR FLANGE IBC.EN_04/18 INOXMIMGRUP S.L. reserves the right to modify this information without prior notice.

agitMIM AGITATION AND MIXTURE Vertical agitators INOXMIM has developed VCI and VCIN vertical agitators using a simple, compact design which provides high agitating performance at low acquisition cost. Both the VCI and the VCIN are fitted with a worm geared motor and lip sealing system, allowing the use of impellers with a large vane surface in order to achieve high agitating performance. All these characteristics, along with the interchangeability of agitating components and the specific selection of the ideal configuration for each process, mean these vertical agitators are widely used in water...

DIMENSIONS OF THE VCI / VCIN MODELS IEC FLANGE AGITATOR BASE DIN 2576 PN10 FLANGE AGITATOR BASE OVERALL DIMENSIONS OVERALL DIMENSIONS VCI-VCIN.EN_04/18 INOXMIMGRUP S.L. reserves the right to modify this information without prior notice.

Vertical agitator GFL vertical agitators, driven by a parallel geared motor, work at low turning speeds, allowing the use of agitator elements with a large surface area in order to achieve high work performance. These agitators are characterised by their wide range of applications and high agitating capacity. This is achieved through the multiple configurations of the impellers, which also means GFL agitators can adapt to the requirements of each system. As a result, they are essential in the food, cosmetics, pharmaceutical and chemical industries. In the food sector they can be used in the preparation...

inoxMIMgrup, sl DIMENSIONS AND CHARACTERISTICS OF THE GFL MODEL CHARACTERISTICS Level of finish: Industrial / Foodstuff / Sanitary Anchor flange: Square / DIN 2576 / IEC type Parallel geared motor Interchangeability of agitator components Single mechanical seal MATERIALS Parts in contact with the product in stainless steel AISI 316L Parts not in contact with the product in stainless steel AISI 304L, carbon steel and others OPTIONS Other materials: AISI 304L, AISI 904L, Hastelloy, etc. Mechanical seal: dual, cooled Bolstering tower Other anchor flanges Tripod guides Control panel Speed variator...