• Water actuated ON-OFF valves designed for steel working and metallurgical industries.
• High reliability for heavy and continuous duties with adjustable switching speed and easy maintenance.
• Piloting is done by a VPT valve which is air actuated.

• Fluid: Water and HFA.
• Function: Normally Open (NO) or Normally Closed (NC).
• Working Pressure: 350 bar (35 MPa).
• Ambient Temperature: +2°C to +60°C.
• Pneumatic Feeding: Lubricated compressed air 5 to 7 bar (0.5 to 0.7 MPa).
• Electrical Input: 24 V DC - 110/220 V.
• Connections: SAE6000 drilling up to size 09, INOXIHP drilling from size 10.
• Materials: Body in carbon steel, piston and seat in stainless steel.

• Proximity switches, air system control, filter for piloting line.
• Interface with two different throttles for opening/closing shifting times valve regulator.
• Flanges kit and base frame available.

• Body in stainless steel, ANSI flanges drilling, zero offset in line version.

• INOXIHP DN sizes range from 40 mm (1 1/2”) to 200 mm (8”).

Note: Specifications and dimensions are subject to change without notice due to ongoing research and development.