ALUMINUM CYLINDER TUBES Cylinder tubes for control and working cylinders are used in pneumatic and low-pressure hydraulic systems. ALLOY ! AlMgSi 0,5 DIN 1725 ! EN AW-6060/ 6063 ! warm-hardened ! tensile strength Rm ≥ 215 MPa SURFACE ROUGHNESS ! machining according to drawing, CPT plus SURFACE PRODUCTION PROCESS ! ot extruded via chamber mould calibrated h ! at manufacturing lengths, it is possible for contact points on both sides ! hard-anodized, inside and outside ! coating thickness 20 µm ! hardness 420 HV ! without coating ! to fixed lengths, burr-free, with narrow tolerances In our high-bay warehouse with integrated Sawing center store over 600 tons of aluminum tubes and profiles DRAWING PROFILES ! on demand INOMETA-EXPRESS Complete packaging units of tubes with standard dimensions can be dispatched from stock within 24 hours. INOMETA GmbH · Planckstraße 15 · 32052 Herford, Germany · T +49 (5221) 777-0 · F +49 (5221) 777-666 · info@

ALUMINUM CYLINDER TUBES – DIMENSIONS (mm) Approximately 600 tons of aluminum cylinder tubes are available from stock in the following dimensions: nominal tolerance D x s width nominal tolerance D x s width D = external diameter in mm s = wall thickness in mm nominal width = Inner diameter in mm kg/m = average meter weight (rounded) • = storage dimensions other dimensions on request storage dimensions – dispatch of complete packaging units possible within 24 hours (European Union) ALUMINUM CYLINDER TUBES – DIMENSIONS (Inch) nominal tolerance D x s kg / m width nominal tolerance D x s kg / m width...