SAVEOMAT Gravimetric weighing
16Pages

SAVEOMAT Gravimetric weighing

SAVEOMAT Precise gravimetric weighing is the basis for the automation of extrusion lines and is thus a basic requirement for achieving the highest possible product quality. SAVEOMAT products continuously dose a wide variety of materials with the highest precision. A constant mass throughput not only enables significant material savings and thus contributes to cost reduction, but also increases the sustainability of our customers‘ extrusion products.

INSPIRE beyond measurement WE GIVE EXTRUSION TECHNOLOGY A FRESH APPROACH WE INSPIRE THROUGH INNOVATIONS For more than 35 years, the name „iNOEX“ has been associated with pioneering technology and ground-breaking inventions for measurement and control technology. With innovative strength, a willingness to push boundaries and a wide range of products and services, we aim to inspire our customers. Over 35 years of SAVEOMAT systems reflect the efficiency and reliability of gravimetric weighing. In close cooperation with our customers, the SAVEOMAT product range has been continuously developed...

SAVEOMAT Gravimetric weighing Gravimetric weighing is the basis of extrusion line automation. The funnel weighers, which are suitable for a wide range of materials, enable the weight per length and mass throughput to be regulated by recording the measured data and by means of the integrated control system. The result is a constant production with reduced material consumption. In this quantitative analysis process, the material to be dosed is measured by one or more integrated load cells. This automatically compensates for possible fluctuations in bulk density. This means that the end...

In addition to the high level of precision, the funnel weighers offer maximum flexibility through easy cleaning and fast product changeover. They are controlled by means of an intuitive user interface. GRAVIMETRIC EXPLANATORY VIDEO ADVANTAGES AND FEATURES Constant mass throughput with raw material savings of up to 5% Consistent weight per length reduced to an absolute minimum Reduction of start-up scrap Optimum flow behaviour of the materials Dead-zone-free filling, weighing, and dosing Suitable for complex recipes and special applications (with up to 7 components) Industry 4.0 ready for...

SAVEOMAT G SAVEOMAT G is the basic version of the SAVEOMAT series. The Mono weighing hoppers is suitable for granules and are available in different heights. Depending on the control loop, they use the measured values to control the screw speed of the extruder or the haul-off speed. This increases production output, reduces raw material consumption, and ensures substantial savings. Control takes place via an intuitive user interface and offers numerous software functions. ADVANTAGES AND FEATURES Optimal hopper geometry for perfect flow behaviour of the raw materials Overload protection of...

SAVEOMAT P SAVEOMAT P is a funnel weigher specialized for the blockage-free feeding of powder with a maximum chalk content of up to 20%. Thanks to the optimal hopper geometry, an enlarged inlet, turbine vibrators at the hopper inlet and the storage hopper outlet, material deposits and bridging are avoided. This ensures a stable production flow and a constant material flow with a consistent minimum weight per length. ADVANTAGES AND FEATURES Special hopper geometry for optimum flow behavior of powder with up to 20% chalk content Blockage-free feeding of easily sticking material Dust and...

SAVEOMAT HF SAVEOMAT HF is the dosing unit for materials with a chalk content of up to 100%. A consistent material flow is ensured at all times. Depending on the material and application, the SAVEOMAT HF has either a twin-screw or a spiral dosing unit, with which the products are dosed smoothly and cleanly. Both variants can be combined with other gravimetric powder and granule weighers. Due to the high feed rate fluctuations of powder materials, the measuring and control frequency for SAVEOMAT HF weighers is significantly increased. All PVC mixtures with a chalk content of up to 100 % can...

SAVEOMAT COEX SAVEOMAT COEX is a special application option for coextruded products. As precise feeding and exact mixing of the various material components is crucial in the production of pipes and fittings using the coextrusion process. Whether in the production of conventional PE-multi-layer pipes for reliable gas and water supply and wastewater disposal or in the marking of the pipes by coloured longitudinal stripes. Even when several extruders are used, the SAVEOMAT COEX application ensures a stable production process and a constant flow of material. Based on the recorded measurement...

SAVEOMAT DOS The flexibly combinable dosing station allows the exact blending of up to seven material components. Two configuration levels are available the DOS 2 (one main and one side component) and the DOS 7 (one main and up to six side components). Dosing is carried out according to customer-specific requirements. The processing of granules and powder is also possible. The dosing station can be flexibly equipped with different funnel weighers and thus fulfills the most demanding processes of gravimetric weighing. Common applications include film extrusion or PVC pipe production with...

SAVEOMAT Liquid SAVEOMAT Liquid is the multi-component dosing station for the recipe-precise dosing of solid and liquid components. The use of silane and peroxide is especially applied in PEXa and PEXb pipe extrusion and cable production. Precise mixing of the raw material is achieved by combining a static and a dynamic mixer. An injection tube is integrated in the dynamic mixer, whereby the peroxide or silane is introduced and ensures uniform wetting. Thanks to its safety features, SAVEOMAT Liquid meets the highest safety requirements while allowing a wide range of recipes. ACCESSORIES...

SAVEOMAT Satellite SAVEOMAT Satellite is the innovative vacuum conveying system in which the suction capacity can be split as required. The valve technology on the vacuum manifold allows the power to be split between different material separators. A control of the applied vacuum ensures a constant vacuum during material conveying and guarantees a delay-free material supply. Complete extrusion lines or entire production halls can thus be supplied via a single or several vacuum generators connected in parallel. The suction power is applied as needed for each individual component, ensuring...