iXRAY X-ray systems
12Pages

iXRAY X-ray systems

iXRAY The products of the iXRAY family support our customers in capturing sensitive product and quality data with high precision and in adapting their processes to the increasingly stringent quality requirements. iXRAY also offers the possibility to classify multilayer products and aluminium composite pipes. This not only advances the digitization and automation of the extrusion line, but also saves valuable raw materials, reduces scrap rates, and increases sustainability.

INSPIRE beyond measurement WE GIVE EXTRUSION TECHNOLOGY A FRESH APPROACH WE INSPIRE THROUGH INNOVATIONS For more than 35 years, the name „iNOEX“ has been associated with pioneering technology and ground-breaking inventions for measurement and control technology. With innovative strength, a willingness to push boundaries and a wide range of products and services, we aim to inspire our customers. Product firsts and the latest technological developments are the hallmarks of iNOEX GmbH. The know-how of our employees contributes to this development competence. The iXRAY series, which celebrated...

iXRAY X-ray technology X-ray technology is a robust and highly precise measuring instrument. It is used in wall thickness and diameter measurement for single and multi-layer pipes and hoses as well as cables and rubber applications. Modern X-ray components combined with the latest semiconductor sensor technology allow precise spatial resolution and repeatability in the µm range. The technology is used for multilayer tubes such as aluminium composite tubes, pressure hoses with fabric inserts, rubber hoses, foamed products, medical hoses and tubes as well as cables. The µm-accurate...

Furthermore, the X-ray units do not present any hazard to the operator. The radiation output is far below the permitted legal limits and other safety aspects ensure safe use. ADVANTAGES AND FEATURES Wall thickness and diameter measurement for single and multi-layer pipes and hoses Process optimization and material savings Thin-point control in combination with SAVEOMAT gravimetric systems Low radiation power far below the permitted legal limits as well as other safety aspects Standardized process data interface (OPC-UA)

iXRAY The iXRAY solves almost all measuring, automation and documentation tasks for single and multi-layer pipes and hoses. Thanks to a precise spatial resolution and repeatabilities in the µm range, the system reliably generates exact measurement data. At high line speeds, the X-ray system - optionally two or three axes - delivers precise measurement results. The standard systems are available for pipe dimensions from 1 to 63 mm. The iXRAY series is user-friendly and the line operator only has to select the pipe, hose, or cable recipe to start the measurement. Highest line efficiency while...

ADVANTAGES AND FEATURES Measurement of wall thickness distribution, inner and outer diameter, ovality and eccentricity Up to 6 wall thickness values on the pipe or hose circumference Up to 3 diameter axes at 120° angle High repeatability No calibration necessary High precision X-ray tubes with anode voltage up to 60 kV Easy exchange of X-ray tubes possible Non-contact measurement, no seal, and no dimension-dependent accessories Simple operation with little training requ

iXRAY Features FOLDABLE RADIATION PROTECTION TUBES The radiation protection tube can be opened on both sides afety switch in conjunction with the safety PLC switches S off the radiation in the open position he radiation protection tubes are optionally T available with a tube guide AIR SHOWER (OPTIONAL) Air shower for inlet and outlet to blow off water droplets and prevent extrusion aerosols from entering the beam path The blowing strength can be individually adjusted at the front and rear via an adjustable restrictor Switching on and off via the operating terminal or automatic switching on...

PIPE GUIDE (OPTIONAL) Double guide wheels Distance manually adjustable to guide the tube through the center of the measuring chamber MEASUREMENT AND CONTROL COMPONENTS IN CONJUNCTION WITH INOEX GRAVIMETRY Mass throughput control Weight per length control via haul-off/extruder Thin-point control Ramp function

iDM 4.0 The iNOEX Data Manager (iDM) comprises a central data logger for the collection of all process and quality data of the iNOEX systems in the extrusion line. Optimization potentials can be identified, and productspecific key figures can be analysed and evaluated. The software is installed as a virtual machine in the customer‘s network, so that no additional hardware is required. OPC-UA as a standardized process data interface, integrated with the latest measurement, control and automation solutions from iNOEX, transfers the data. A connection of legacy systems via the iDM gateway is...

iXRAY Products at a glance Type 2 iXRAY 16 3 2 iXRAY 32 3 2 iXRAY 63 3 *Depending on material and application. For a particular application field, the respective data are specified precisely.

GERMANY iNOEX GmbH Phone: +49 5422-60507-0 Fax: +49 5422-60507-101 iNOEX GmbH Maschweg 70 49324 Melle Tel.: +49 5422-60507-0 Fax: +49 5422-60507-101 P. R. CHINA Suzhou iNOEX Smart Technology Co., Ltd. Phone: +86-512 6568-0816 Fax: +86-512 6568-0820 USA iNOEX LLC Phone: +1-717 672-0870 Fax: +1-717 672-0872 TURKEY iNOEX Plastik LTD. Phone: +90 544-434-5938 Fax: +90 216-365-0837 DUBAI iNOEX Middle East Phone: +971 55860 9058 © iNOEX GmbH - All rights reserved. Reproduction in whole or in part without the written consent of the copyright holder is prohibited. iNOEX GmbH reserves the right to...