ino XC2000 CALIFORNIA - 4 AXIS CNC PROFILE MACHINING CENTRE Description: 4 Axis CNC controlled profile machining centre. Thanks to the protection cover, the machine has both sound and swarf isolation. C column type profile carriage ensures 0,1mm./1m. Accuracy. 7,5 kW high speed spindle works up to 24.000 rpm and is able to work on 0-180 degrees around the profile. The alloys that can be processed on the machine: Aluminium up to 20 mm wall thickness – steel up to 2 mm wall thickness – light alloys such as PVC and etc. The CALIFORNIA has profile clamps that are manually positioned according to the positions assigned by the CAD-CAM software. AUTOMATIC POSITIONING is optional. All clamps are mounted on the machine with linear bearings and move on linear guides. Thanks to 6+1 positions tool magazine, it is possible to carry any tool b/w 1 mm – 20 mm tool diameter and 200 mm of disc cutter. The disc cutter is vital for alu machining in doors&sliding series. Additional 6 positions tool changer magazine is optional. Waste pieces are isolated by the Machine cover and extracted by the operator via open endings on both sides of the Machine.

Axis information: X axis net processing length: 4.200 mm. – with the second stopper 8.000 mm. With disc cutter milling from the beginning of the profile: 4.205 mm. With disc cutter milling from both ends of the profile: 4.000 mm. Y axis net processing width: 230 mm.. Z axis net processing depth: 235 mm. The body: Vibration free steel chasis, processed with the highest accuracy before mounting the mecanichal accessories. Spindle Heads: 7.5 kw 1.000 -24.000 rpm ISO30 Air Cooling spindle with an inverter adjusted for any rotation speed. 10.0 kW HSK F-63 Liquid Cooling spindle is optional. Axis technical...

INDUSTRIAL CNC CONTROLLER – ESA AOTOMOTION – www.esautomotion.it 12 Axis RTCP (Rotation Tool Center Point) type of 4 Axis simultaniously interpolating real CNC controller. Italian technology with the software and all the hardware. 19” Touchpanel + the CNC controller + the power supply + servo motors + servo drivers with Can-Open. Each axis has “Absolute Encoder” for avoiding the problems caused by homing and home sensors. The Machine does not need to g oto home position each time the operator turns on the Machine. All power & encoder cables, driver mounted motor communication cables and all motor...

Pneumatic Profile Clamps: 230 mm. X 235 mm. clamping section. 6 pieces manually positioned. Automatic positioning is optional. Thanks to the special design of the clamps, that are for machining Windows and Doors and Curtain Wall profiles, the loading and offloading is extremely easy. Optional: “Wide Profile Clamps” for processing wider profiles up to 350 mm. of width.

Equipment: Referance points: 2 pieces pneumatically operated. For using the Machine with 2 processign stations and also for machining profiles longer than the measure. Both endings of the Machine are opened as a standard accessory. Profile clamps: 6 pieces are standard. The number of the clamps can be increased up to 8 clamps optionally. CAD-CAM Software: Uni_Link INO-OnBoard Software – 1 licance for the Machine + 1 licance for the office is included. Automatic opening and closing machine enclosure cover: CNC controlled according to the working cycle. Spray mist cooling system with oil tank mounted...

Tool Changer Magazine: The capacity is in total 7 places. 6 standard ISO30 or HSK-F63 tool holders + 1 disc cutter with maximum diameter of 200 mm. Placed at the beginning of the Machine close to the first referance point and the controller terminal. The tool changer is mounted on the Machine body as stationary to use long sized and large diameter tools. Maximum disc cutter diameter 200 mm. Maximum tool size 150 mm. Magazine cover pneumatically openning and closing to keep the tools clean from swarf. Optional: Additional 2nd magazine is availbale with additional 6 tool positions. Air Cooling...

UNI_LINK 3D CAD-CAM: • Design, R&D and application are carried through the vast experinece of ino machinery team and Uni_Link engineers. • The perfect optimization of economic profile working in 3,4 and 5 Axis. • Importing of DXF files and converting them to 3D images. • Generating G-codes over the DXF files. • Understanding of the operations on the DXf files and auto-tooling • Also availbale in Office verson with a perfect simulation interface, so that the one working at the Office will also prepare the profile machining programs just like he is beside the machine. • Incredibly user friendly...