The Power of Reliability PRODUCT SPECIFICATIONS SITE INVERTER SERIES 300 Watt 1RU DC to AC Sine Wave Inverter for AC Powered Wireless Communications Equipment The ICT SITE INVERTER 300 is a 1RU true sine wave inverter that is designed to convert your site s 12, 24, or 48 volt DC power into 300 watts of high quality 115 volt AC power, and be mounted in a 19 inch equipment rack at communications sites. The ICT Site Inverter 300 provides 300 watts, of true sine wave output with extremely low harmonic distortion and low idle current draw. The DC inputs, AC outlets and grounding stud are all located on the back of the inverter, close to where the wiring connections are. With proven ICT quality and reliability designed in, and manufactured in North America by ICT, the Site Inverter 300 provides unsurpassed functionality, scalability, and peace of mind for providing AC power at your DC-powered communications sites. AC components at communications sites often require less than 300 watts of AC power. These include links, multiplexers, PoE hubs, alarms and monitoring equipment, digital video recorders, access control systems, or laptops and test equipment. The ICT Site Inverter 300 provides 300 watts of true sine wave AC power. Designed to FCC Class B spec, with extremely low harmonic distortion and high quality pure sine wave output, this inverter is ideal for communications site equipment. The inverter can handle high starting surges, and will provide its full output power up to 60 degrees C. Optional accessories include a 1RU 19” Rack Mount Tray, and a kit that provides two front auxiliary outlets when AC power is required on the front of the rack. All connectors are on the back, close to your rack wiring connections Optional 1RU 19-inch Rack Mount Tray integrates easily into site infrastructure Reliability High reliability is achieved through careful design that virtually eliminates internal wiring and connections that can fail. All components are carefully selected and no substitutes are permitted. Built-in protection features protect the inverter from most abnormal conditions. The brushless, ball bearing fan pulls in cool air from the front, so no extra clearance is required around the unit. Every inverter is built in North America by ICT and extensively tested before it leaves the factory. The ICT Site Inverter 300 comes with a two-year warranty. Energy Saving Design With one of the highest efficiency designs available at this power level, and lowest idle current draw ratings, you can be assured that most of your power is going into running your loads. The thermally controlled fan only turns on when extra cooling is required.

Total Harmonic Distortion Continuous Output Power (single inverter) Maximum Surge Power (single inverter) Output Specifications Input Specifications Efficiency (full load) No-load power consumption Input Voltage Range General Operating Temperature Status Indicators Front Panel LED’s for AC Status and Fault Conditions Weight (lbs/kg) Protection Features Under Voltage (Inverter will automatically reset when the under voltage condition is cleared). Over Voltage (Inverter will automatically reset when the over voltage condition is cleared). Inverter is designed to withstand 600W for up to 3 seconds....