Medium Voltage Drives GM150 SM150
202Pages

Innomotics Converts! Medium Voltage Drives GM150 SM150 innomotics.com/gm150 innomotics.com/sm150 © Innomotics 2024

The Siemens Businesses Large Drives Applications and Low Voltage Motors have been transferred to Innomotics. The brand change from Siemens to Innomotics is ongoing. Siemens’ or Innomotics’ legal information, trademarks or logos contained in product related documents do not necessarily represent the actual branding used for the products. Any technical product information remains valid independently of the brand. Orders received as of August 1, 2024, will be confirmed exclusively with the product mark “Innomotics” regarding the concerned products and services. Independent of the order date,...

Innomotics GM150 Innomotics SM150 Medium voltage drives Innomotics GM150 IGBT version Innomotics GM150 IGCT version Innomotics SM150 IGBT version Innomotics SM150 IGCT version Innomotics SM150 IGCT version with diode infeed Static excitation units Motors for converter operation Engineering information

© Siemens 2024 Innomotics GM150 Innomotics SM150 Catalog D 12

© Siemens 2024 Innomotics GM150 Innomotics SM150 Catalog D 12

© Siemens 2024 Innomotics GM150 Innomotics SM150 Catalog D 12

© Siemens 2024 Innomotics GM150 Innomotics SM150 Catalog D 12

1 Introduction 1.1 Overview of catalog changes Overview of catalog changes This catalog will be updated on an irregular basis. See the following table for an overview of important changes compared to the previous version. Overview of catalog changes Section Update of cover and back page, product and tool designations, Internet addresses, etc. ( "Innomotics") Innomotics GM150 in IGBT version: New types with 6.6 kV output voltage (water cooling) Innomotics GM150 and SM150 in IGBT version: New types with improved characteristics for constant load torque applications (3.3 and 4.16 kV, air and...

1 Introduction 1.2 Overview of Innomotics medium voltage drives Overview of Innomotics medium voltage drives Perfect Harmony GH150 Power range Direct water cooling: 4.0 to 47 MVA Air cooling and indirect water cooling: 4.0 to 70 MVA 1) Area of application General purpose applications General purpose applications General purpose applications Induction and synchronous motors Induction and synchronous motors Induction and synchronous motors Energy recovery Multi-motor drives Voltage source inverters: Cell-based topology, modular multilevel converters Pumps, fans, compressors, existing line...

1 Introduction 1.3 Innomotics GM150 and Innomotics SM150 Innomotics GM150 and Innomotics SM150 Innomotics GM150 and Innomotics SM150 converters represent the expansion of the Innomotics drive family in the medium voltage range. They are supplied as ready-to-connect cabinet units. Innomotics GM150 converters are designed as individual drive for applications with square-law and constant load characteristics without regenerative feedback. Typical applications: • Pumps and fans • Compressors • Extruders and mixers • Mills • Marine drives The inverters on the motor side (Motor Modules) have IGBT...

1 Introduction 1.3 Innomotics GM150 and Innomotics SM150 Innomotics SM150 converters are designed for demanding single and multi-motor applications and meet the following requirements: • High dynamic response • Operation at low frequency • Line power factor = 1.0 (can be freely selected) • Four-quadrant operation Typical applications: • Roller drives (cold, hot) • Hoisting drives • Test stands • Belt systems Both the line-side infeed/regenerative feedback units (Active Line Modules) and the motor-side inverters are either equipped with IGBT or IGCT power semiconductors. © Siemens 2024...

Line Module (line-side rectifier) Basic Line Module, 12pulse (two-quadrant operation) Basic Line Module, 24pulse (two-quadrant operation) Option Standard for parallel circuit 3.3/4.16 kV Option Standard for parallel circuit Basic Line Module, 36pulse (two-quadrant operation) Standard for triple parallel circuit Active Line Module (four-quadrant operation) Motor Module (motor-side inverter) Voltage range Cooling method • Air cooling • Water cooling Standard Standard Standard Standard With encoder is standard With encoder is standard Control modes Without encoder With encoder Without encoder...

2 Innomotics GM150 IGBT version 2.1 Overview Innomotics GM150 IGBT version Innomotics GM150 in the IGBT version (air-cooled) Innomotics GM150 converters in the IGBT version can be optimally combined with Innomotics converter motors. This ensures that the drive solution is particularly cost effective, compact and efficient. Innomotics GM150 converters in the IGBT version offer cost-effective drive solutions that can be matched to customers' specific requirements by selecting from the wide range of components and options. IGBT converters are available for the following voltages and outputs:...

2 Innomotics GM150 IGBT version 2.2 Benefits Benefits • Compact design and highly flexible configuration ensures easy plant integration • Simple operator control and monitoring from the user-friendly operator panel • Simple and reliable operation through integrated maintenance functions: The converter signals early on and automatically if maintenance is required or components need to be replaced • High degree of ruggedness and reliability by using HV IGBT technology and a fuseless design combined with intelligent response to external disturbances • Can be easily integrated into automation...

2 Innomotics GM150 IGBT version 2.3 Design Innomotics GM150 as air-cooled IGBT version, internal design Block diagram The following circuit versions are available for the various output voltages of the Innomotics GM150 in the IGBT version. © Siemens 2024 Innomotics GM150 Innomotics SM150 Catalog D 12

2 Innomotics GM150 IGBT version 2.3 Design Basic circuit, 12-pulse infeed, diode rectifier in the Basic Line Module connected in series 24 pulse infeed by connecting two Basic Line Modules in parallel (option N15 for 2.4 to 4.16 kV output voltages – for 6.6 kV, see Fig. 2-9), diode rectifier connected in parallel in the Basic Line Module © Siemens 2024 Innomotics GM150 Innomotics SM150 Catalog D 12