SOA-1290-40-YY-25dB

Product catalog summary

Product Overview:
The document details the specifications and usage guidelines for the SOA-1290-40-YY-25dB, a high-gain semiconductor optical amplifier by Innolume GmbH. It features high gain up to 25dB at 1290nm, ultra-low ripples, and is based on InAs/GaAs quantum dot technology. It is RoHS compliant and suitable for applications like swept-source tunable lasers and optical amplifiers.

Specifications:

Operating current: 400-500 mA
Forward voltage: 1.4-1.6 V
Gain: 20-25 dB
Gain mean wavelength: 1280-1300 nm
Gain bandwidth: 35-45 nm
Gain saturation output power: 10-12 dBm
ASE optical power: 0.5-1 mW
ASE mean wavelength: 1270-1290 nm
Noise figure: 15-20 dB

Absolute Maximum Ratings:

SOA reverse voltage: Max 2 V
SOA CW forward current: Max 1200 mA
Input optical power: Max 20 dBm
Thermo Electric Cooler current: Max 3 A
Thermo Electric Cooler voltage: Max 4 V
Fiber bend radius: Min 3 cm
Chip operating temperature: 10-40°C
Case operating temperature: 0-70°C
Storage temperature: -40-85°C

Safety and Operating Instructions:
The device emits invisible light that can be harmful to the eyes. Proper laser safety eyewear is required. The SOA should not be operated outside its maximum ratings to avoid damage. A proper heatsink is necessary, and the fiber should not be bent with a radius smaller than 3 cm. Electrostatic discharge precautions are essential.

Performance Data:
Graphs in the document illustrate gain spectra at different currents and input signals, ASE light-current-voltage characteristics, and typical spectra of amplified optical signals. These provide insights into the device's performance under various conditions.

Additional Information:
Part number identification is based on the optical fiber type, with options for PM980 and HI1060 fibers. The document also includes thermistor and fiber specifications, emphasizing the importance of proper handling and maintenance.

Catalog excerpts

Innolume GmbH Konrad-Adenauer-Allee 11, 44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com NOTE: Innolume product specifications are subject to change without notice

Open the catalog to page 1

Innolume GmbH Konrad-Adenauer-Allee 11, 44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com TYPICAL PERFORMANCE for reference only CW operation, chip temperature 25°C, the case is mounted on room temperature heatsink Test conditions: Gain spectra at different currents Gain and Output power vs. input signal 26 Gain spectra at different input signals 28 Typical spectra of amplified optical signal Output Input ASE power density (dBm/nm) Part Number Identification YY: Optical fiber type PM – PM980 fiber HI – HI1060 fiber Example: SOA-1290-40-PM-25dB

Open the catalog to page 2

Innolume GmbH Konrad-Adenauer-Allee 11, 44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com FIBER SPECIFICATION THERMISTOR SPECIFICATION Parameters Thermistor type Numerical aperture (Typical) 10 ± 0.1 kOhm Cutoff wavelength Length (each port) Connector alignment to the PANDA fiber The output light is polarized along the slow axis of PM fiber. SOA anode "+" SOA cathode "-" Case TEC "-" SAFETY AND OPERATING INSTRUCTIONS The light emitted from this device is invisible and can be harmful to the human eye. Avoid looking directly into the fiber connector when the device is in operation....

Open the catalog to page 3

SOA-1290-40-YY-25dB

SOA-1290-40-YY-25dB

Catalog excerpts

All Innolume GmbH catalogs and technical brochures