SOA-1140-90-YY-24dB

Product catalog summary

Product Overview:
The document provides technical specifications and operational guidelines for the SOA-1140-90-YY-24dB, a broad-band semiconductor optical amplifier by Innolume GmbH. It features a broad gain bandwidth of 1100-1200nm with gain up to 24dB, ultra-low ripples, and strong linear polarization. The device is based on InAs/GaAs quantum dot technology and is RoHS compliant.

Specifications:
- Operating Conditions: CW operation at a chip temperature of 25°C, mounted on a room temperature heatsink.
- Electrical Parameters: Operating current ranges from 400 to 500 mA, with a forward voltage of 1.3 to 1.5 V.
- Optical Parameters: Gain ranges from 20 to 24 dB, with a mean wavelength of 1140 nm and a bandwidth of 70 to 90 nm.
- Temperature Ranges: Case operating temperature is 0 to 70°C, storage temperature is -40 to 85°C, and chip operating temperature is 10 to 40°C.

Absolute Maximum Ratings:
- SOA reverse voltage: Max 2 V
- Thermo Electric Cooler current: Max 3 A
- Input optical power: Max 20 dBm

Safety and Operating Instructions:
- Avoid direct eye exposure to emitted light; use proper laser safety eyewear.
- Do not exceed absolute maximum ratings to prevent damage.
- Ensure proper heatsinking with specified mounting techniques.
- Avoid back reflection using optical isolators.
- Handle fibers carefully, maintaining a minimum bend radius of 3 cm.
- Protect against electrostatic discharge (ESD) with appropriate precautions.

Applications:
The amplifier is suitable for use in swept-source tunable lasers, booster optical amplifiers, and optical preamplifiers.

Performance Data:
Graphs illustrate gain spectra at different currents and input signals, showing the relationship between input signal strength and output power across various wavelengths.

Catalog excerpts

Innolume GmbH Konrad-Adenauer-Allee 11,44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com Features: • Broad band (1100-1200nm) gain up to 24dB • Ultra low ripples 0.01dB (RMS) • Based on InAs/GaAs quantum dot chip • Strong linear polarization • RoHS compliance Applications: • Swept-source, tunable lasers • Booster optical amplifiers • Optical preamplifiers NOTE: Innolume product specifications are subject to change without notice

Open the catalog to page 1

Innolume GmbH Konrad-Adenauer-Allee 11, 44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com TYPICAL PERFORMANCE for reference only CW operation, chip temperature 25°C, the case is mounted on room temperature heatsink Gain spectra at different currents 40 Gain and Output power vs. input signal 27 Gain spectra at different input signals Spectra of amplified optical signal Test conditions: ASE power density (dBm/nm) No input signal Input signal: 10 dBm @ 1110nm 10 dBm @ 1170nm ASE Spectra (no input signal) 0 Part Number Identification YY: Optical fiber type PM – PM980 fiber HI...

Open the catalog to page 2

Innolume GmbH Konrad-Adenauer-Allee 11,44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com FIBER SPECIFICATION THERMISTOR SPECIFICATION Parameters Thermistor type Numerical aperture (Typical) Cutoff wavelength Coating diameter Length (each port) Connector alignment to the PANDA fiber The output light is polarized along the slow axis of PM fiber. DIMENSIONS (in mm) SOA anode "+" SOA cathode "-" Case TEC "-" The light emitted from this device is invisible and can be harmful to the human eye. Avoid looking directly into the fiber connector when the device is in operation. Proper...

Open the catalog to page 3

SOA-1140-90-YY-24dB

SOA-1140-90-YY-24dB

Catalog excerpts

All Innolume GmbH catalogs and technical brochures