SLD-1000-100-YY-25

Product catalog summary

Specifications:
The document outlines the specifications for the Fiber Coupled Superluminescence Diode (SLD) model SLD-1000-100-YY-25. Key parameters include:

Operating output power: 15-25 mW
ASE mean wavelength: 985-1015 nm
ASE bandwidth @ -3dB: 80-100 nm
Polarization Extinction Ratio (PER): 15-20 dB
Operating current: 600-700 mA
Forward voltage: 1.7-1.9 V

Features:

Ultra broadband ASE spectra (950-1050nm)
Low ripples and strong linear polarization
Individual burn-in and thermal cycling screening
RoHS compliance

Applications:

Fiber sensors
Instrumentation
Spectroscopy

Absolute Maximum Ratings:

SLD reverse voltage: Max 2 V
SLD CW forward current: Max 900 mA
Thermo Electric Cooler current: Max 3 A
Thermo Electric Cooler voltage: Max 4 V
Fiber bend radius: Min 3 cm
Chip operating temperature range: 5-40°C
Case operating temperature range: 0-70°C
Storage temperature range: -40-85°C

Thermistor and Fiber Specifications:

Thermistor type: NTC
Resistance @25°C: 10 ± 0.1 kOhm
Numerical aperture (Typical): 0.14-0.12
Cutoff wavelength: 920±50 nm

Safety and Operating Instructions:
The document emphasizes the importance of laser safety, recommending the use of proper eyewear and avoiding direct exposure to the emitted light. It advises against exceeding maximum ratings and stresses the need for a proper heatsink and avoiding back reflection. Electrostatic discharge precautions are also highlighted.

Catalog excerpts

Innolume GmbH Konrad-Adenauer-Allee 11, 44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com Features: • Ultra broadband ASE spectra (950-1050nm) • Low ripples • Strong linear polarization • Individual burn-in and thermal cycling screening • RoHS compliance Applications: _\Fiber_sensors,jnstrumentation,_spectroscopy_ * RMS in 1nm range at ASE maximum, 10pm resolution TYPICAL PERFORMANCE for reference only Test conditions: CW operation, chip temperature 25°C, the case is mounted on room temperature heatsink Light-Current-Voltage Characteristics Spectral Characteristics SLD-1000-100-YY-25

Open the catalog to page 1

Innolume GmbH Konrad-Adenauer-Allee 11, 44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com THERMISTOR SPECIFICATION FIBER SPECIFICATION Parameters Value Unit Parameters HI1060 PM980 Unit Thermistor type Numerical aperture (Typical) Cutoff wavelength Connector alignment to the PANDA fiber The output light is polarized along the slow axis of PM fiber. DIMENSIONS (in mm) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 SLD anode"+" SLD cathode "Case TEC "-"

Open the catalog to page 2

Innolume GmbH Konrad-Adenauer-Allee 11, 44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com SAFETY AND OPERATING INSTRUCTIONS The light emitted from this device is invisible and can be harmful to the human eye. Avoid looking directly into the fiber connector when the device is in operation. Proper laser safety eyewear must be worn during operation with open connector. Absolute Maximum Ratings may be applied to the SLD for short period of time only. Exposure to maximum ratings for extended period of time or exposure to more than one maximum rating may cause damage or affect...

Open the catalog to page 3

All Innolume GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list