*mydirectindustry

1310-2,5w

1 / 3 PagesView full catalog

1310-2,5w

Product catalog summary

Features:

InAs/GaAs Quantum Dot based diode laser.
Operates in CW, quasi-CW, or pulse mode.
High reliability due to proprietary mirror coating technology.
High Heat Load Fibered package with built-in thermistor and TEC.
Isolated electrical contacts with FC/PC optical connector or bare fiber end; optional SMA905 connector.

Specifications:

Test conditions: chip temperature 25°C, output power 2.5W in CW operation.
Output power: 2.5W.
Mean wavelength: 1130-1320 nm with a tolerance of 5-10 nm.
Wavelength temperature tunability: 0.45-0.65 nm/°C.
Spectral width (FWHM): 10-14 nm.
Operating current: 7-8 A; Threshold current: 0.4-0.6 A.
Forward voltage: 1.7-2.0 V.

Absolute Maximum Ratings:

TEC Current: 3 A; TEC Voltage: 15 V.
Lead soldering temperature: 250°C (5 sec).
Anode reverse voltage: 1 V; Forward current: 10 A.
Chip operating temperature range: 5-45°C; Case operating temperature range: 15-60°C.
Fiber bending radius: short/long term 20/40 mm.
Storage temperature range: 5-80°C.

Thermistor and Fiber Specifications:

Thermistor type: BC103J1K; Resistance @25°C: 10 ± 1 kOhm.
Fiber type: step index, BF05859; Core diameter: 105 ± 5 μm; Cladding diameter: 125 ± 5 μm.
Buffer diameter: 250 ± 5 μm; Numerical Aperture: 0.22; Length: 1.5 ± 0.5 m.
Connector: FC/PC or bare cleaved end.

Safety and Operating Instructions:

Laser light is invisible and harmful to the eyes; proper eyewear is required.
Do not exceed absolute maximum ratings to avoid damage or safety hazards.
Use a proper heatsink and ensure the radiator surface is flat within 0.05mm.
Avoid pulling or bending the fiber with a radius smaller than 3 cm.
Clean fiber connectors with isopropyl alcohol and clean-room compatible tissue.
Prevent ESD by using wrist straps, grounded surfaces, and antistatic techniques.

Note: Specifications are subject to change without notice.

Catalog excerpts

Innolume GmbH Konrad-Adenauer-Allee 11,44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com mnoLumeLD-12XX-HHLF-2.5WHigh Power Diode Laser Module - 2.5W Features: • InAs/GaAs Quantum Dot based diode laser • CW, quasi-CW or pulse operation • Proprietary mirror coating technology enabling high reliability High Heat Load Fibered package with built-in thermistor and TEC Isolated electrical contacts FC/PC optical connector or bare fiber end Optional: SMA905 optical connector

Open the catalog to page 1

Parameters Value Unit Thermistor type Innolume GmbH Konrad-Adenauer-Allee 11,44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com

Open the catalog to page 2

Innolume GmbH Konrad-Adenauer-Allee 11, 44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com SAFETY AND OPERATING INSTRUCTIONS The laser light emitted from this device is invisible and will harmful to the human eye. Avoid looking directly into the fiber output or into the collimated beam along its optical axis when the device is in operation. Proper laser safety eyewear must be worn during operation. Absolute Maximum Ratings may be applied to the Laser Diode for short period of time only. Exposure to maximum ratings for extended period of time or exposure more than one maximum...

Open the catalog to page 3

1310-2,5w

1310-2,5w

Catalog excerpts

All Innolume GmbH catalogs and technical brochures