*mydirectindustry

1310-14w

1 / 2 PagesView full catalog

1310-14w

Product catalog summary

Features:

InAs/GaAs Quantum Dot based diode laser
Multi-chip package
High efficiency
Compact size: 53 x 41 x 14 mm
Built-in thermistor
High power SMA 905 connector
Designed for multimode fiber patch cords with 400µm core diameter and 0.22 NA

Specifications:

Test conditions: CW cooled operation at 25°C, output power 14W
Ex-fiber optical output power: 14W
Mean wavelength: 1130-1310 nm
Wavelength tolerance: 5-10 nm
Wavelength temperature tunability: 0.45-0.65 nm/°C
Spectral width (FWHM): 10-14 nm
Operating current: 12-14 A
Threshold current: 1.2-1.5 A
Forward voltage: 4.0-4.5 V
Case operating temperature: 20-60°C
NTC thermistor @ 25°C: 10 kΩ
Module heatload at max current: 50 W

Absolute Maximum Ratings:

Anode reverse voltage: 1 V
Forward current: 15 A
Storage temperature range: 15-90°C
Operating temperature range: 20-60°C

Cooling System Requirements:

Active cooling system recommended with power capability twice the module heatload
Temperature stabilization requires internal temperature monitoring
Wavelength can be adjusted via temperature changes
Radiator surface must be smooth with deviation less than 0.05mm
Use thermo-conductive film or paste between module and radiator

Safety Information:

Laser light is invisible and harmful to eyes
Avoid direct exposure to fiber output or collimated beam
Use proper laser safety eyewear during operation

Catalog excerpts

Innolume GmbH Konrad-Adenauer-Allee 11,44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com mnoLumeLD-12XX-AK3-14WHigh Power Diode Laser - multi-chip package Features: ■ InAs/GaAs Quantum Dot based diode laser ■ Multi-chip package ■ High efficiency ■ Small form factor - 53 x 41 x 14 mm ■ Built-in thermistor ■ High power SMA 905 connector. ■ Designed for multimode fiber patch cords with core diameter of 400um and 0.22 NA Specification for engineering samples

Open the catalog to page 1

Innolume GmbH Konrad-Adenauer-Allee 11,44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com Pin-out: 1,2 - internal thermistor, 3 - Laser (+), 4 - Laser (-}, Mounting: Four M3 or #4 mounting screws. Use TECs with cold side dimensions within 40.5mm x 40.5mm footprint. Cooling system requirements. Active cooling system is recomended for heat dissipation from laser module. Active cooling system must have power capability of 2 times higher compare to the “Module Heatload” value. For temperature stabilized operation the cooling system should use internal temperature monitor. The...

Open the catalog to page 2

All Innolume GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list