INKOMA-GROUP Inkoflex couplings 2013.01 The INKOMA-Inkoflex coupling is a machine element for the transmission of torque between shafts where absolute alignment cannot be guaranteed, due to manufacture or assembly limitations, or where due to operating conditions an ideal aligment cannot be achieved. The INKOMA Inkoflex coupling compensates for both radial and angular misalignment, occurring during operation, up to the permitted designed limits. Patents for the INKOMA Inkoflex coupling have been applied for in all leading industrial countries. The INKOMA-Inkoflex coupling has the following important features: •Torsionally stiff shaft connection with compensation for radial and angular misalignment. •no loss of synchronicity •dynamically balanced •short length •no reactive loads on related bearings •accommodates a few millimeters of radial misalignment and up to 5° of angular misalignment •maintenance free •all-steel construction INKOMA - GROUP INKOMA ALBERT A - I - M

Inkoflex couplings The INKOMA-lnkoflex coupling IFK is available in the following Both outer discs have tapped holes for connecting components. The number of tapped holes on pitch circle "C". 6 flexing drive module= 6 x 60° Both outer discs have finished bores in outward facing hubs and Basic version A1 with additional shrink disc. The shrink disc allows keyless fitting to the shaft. Basic version A1 with additional adaptor flanges. These flanges have hubs for shaft fitting. A5= Hub version with inward facing integral hubs: Both outer discs have finished bores in inward facing hubs. A6=Separable...