INKOMA-GROUP ALBERT SDA - Spindle direct drive actuator 2013.01 The ALBERT SDA is a modular direct drive linear actuator system for use in a wide range of applications and industries. The actuators can operate with fast linear speeds and high duty in high load conditions. The SDA can be used as a single drive linear actuator. Alternatively, as high precision motion control with synchronisation between axis is possible, the SDA is a perfect solution as part of a multi-axis system. Available in 4 different sizes with a fully modular construction and vast array of accessories, the SDA can be configured to achieve bespoke application requirements. The SDA has a rigid construction with a fully sealed housing, equipped with robust axial and radial bearings and lifetime lubrication. The use of a pivoting bracket attached to the housing, coupled with a range of different spindle ends ensures a pivoting motion is possible. As the SDA is an electromechanical linear solution there is no possibility of oil or air leaks as associated with hydraulic and pneumatic cylinders. As the construction of the SDA is fully modular a range of motor mounting flanges, bell housings and couplings are available to connect various motor designs. For faster linear speeds and higher duty capability ball screw versions are available across the entire SDA range. INKOMA - GROUP INKOMA ALBERT A - I - M

ALBERT SDA - Spindle direct drive actuator Design features • max. dynamic axial forces of the sizes: ■ lifting speed from 0,5 m/min to 30 m/min depending on load and duty ■ self-locking due to trapezoidal design ■ life-time lubrication due to high-quality long life grease and encapsulated housing design ■ stroke lengths available in standard or customised design (allowing for critical buckling and rotational speed values) ■ electronic synchronisation of multiple actuators is possible ■ special spindle diameters, leads and multi-start threads are possible The ALBERT SDA is an economical drive...