Up to 1800 kVA at 1500 V TRANSFORMERLESS CENTRAL INVERTERS WITH A SINGLE POWER BLOCK Maximum power density These PV central inverters feature more power per cubic foot. Thanks to the use of highquality components, this inverter series performs at the highest possible level. Latest generation electronics The B Series inverters integrate an innovative control unit that runs faster and performs a more efficient and sophisticated inverter control, as it uses a last-generation digital signal processor. Furthermore, the hardware of the control unit allows some more accurate measurements and very reliable protections. These inverters feature a low voltage ridethrough capability and also a lower power consumption thanks to a more efficient power supply electronic board. Improved AC connection The output connection has been designed in order to facilitate a direct close-coupled connection with the MV transformer. www.ingeteam.com [email protected] Maximum protection These three phase inverters are equipped with a motorized DC switch to decouple the PV generator from the inverter. Moreover, they are also supplied with a motorized AC circuit breaker. Optionally, they can be supplied with DC fuses, smart grounding kit and input current monitoring. Maximum efficiency values Through the use of innovative electronic conversion topologies, efficiency values of up to 98.9% can be achieved. Thanks to a sophisticated control algorithm, this equipment can guarantee maximum efficiency depending on the PV power available. Enhanced functionality This new INGECON® SUN Power range features a revamped, improved enclosure which, together with its innovative air cooling system, makes it possible to increase the ambient operating temperature.

Up to 1800 kVA at 1500 V Long-lasting design The inverters have been designed to guarantee a long life expectancy, as demonstrated by the stress tests they are subjected to. Standard 5 year warranty, extendable for up to 25 years. Monitoring and communication Ethernet communications supplied as standard. The following applications are included at no extra cost: INGECON® SUN Manager, INGECON® SUN Monitor and its Smartphone version Web Monitor, available on the App Store. These applications are used for monitoring and recording the inverter’s internal operating variables through the Internet (alarms,...

Input (DC) Recommended PV array power range(1) Voltage Range MPP(2) Maximum voltage(3) Maximum current Nº inputs with fuse holders Fuse dimensions Connection to copper bars Power blocks Max. current at each input From 40 A to 350 A for positive and negative poles Input protections Overvoltage protections Type II surge arresters (type I+II optional) DC switch Other protections Motorized DC load break disconnect Up to 15 pairs of DC fuses (optional) / Insulation failure monitoring / Anti-islanding protection / Emergency pushbutton Frequency Power Factor adjustable THD (Total Harmonic Distortion)(6)...

Input (DC) Recommended PV array power range(1) Voltage Range MPP(2) Maximum voltage(3) Maximum current Nº inputs with fuse holders Fuse dimensions Connection to copper bars Power blocks Max. current at each input From 40 A to 350 A for positive and negative poles Input protections Overvoltage protections Type II surge arresters (type I+II optional) DC switch Other protections Motorized DC load break disconnect Up to 15 pairs of DC fuses (optional) / Insulation failure monitoring / Anti-islanding protection / Emergency pushbutton Frequency Power Factor adjustable THD (Total Harmonic Distortion)(6)...