THE CHARGING STATION for public and private installations The FUSION range is available in two models, FUSION Street for ground mounting and FUSION Wall for wall mounting. This dual equipment range has been designed to cover all electric vehicle charging demands in public and private settings alike. Its standard features include Ethernet and WIFI communications, as well as the latest generation advanced functions such as Dynamic Load Management 2.0 (DLM 2.0) and OCPP protocols. INGEREV FUSION Street / Wall model options FS1MW / FS3MW / FS1AW / FW1MW FW3MW FW1AW Grid Single phase Three phase Single phase Three phase Single phase Three phase MID Wattmeter Type A manual RCD Type A auto-reclose RCD Type B manual RCD C Curve MCB CONNECTOR TYPES - Floor and wall mountable models, suitable for outdoor installation. - Single phase and three phase models, with up to 32 amps per charging socket. - Multiple charging sockets available, Mode 1 + 2 sockets, cables and Mode 3 sockets - MID wattmeter. - RGB LED status indicators. - Multi-language colour screen. - RFID reader. - Ethernet and WIFI. - DLM 2.0. - Compatibility with OCPP. - Updates through USB. - Thermal-Magnetic Differential circuit breakers. - Front door for ease of operation and maintenance. Notes: (1) Large surface for vinyl decals www.ingeteam.com [email protected] - Ethernet switch to minimize the cost of Ethernet cabling. - Warning message in the event of an outage. - Possible customization with vinyl decals on all four faces(1). - General breaker for the rapid disconnection of the charger. - Security lock with key. - Door-opening sensor. - Automatic software updates (OCPP, ISO15118,...) for the entire product life. N2 Type 2 Socket S2 Type 2 Socket with shutters N4 CEE 7/3 type F (Schuko) Socket N7 CEE 7/5 type E (Schuko) Socket S5 N7 and S2 OPTIONS - Bank card reader contactless. - GPRS-2/3/4G communication. - DC current leakage detector. - Smart DLM 2.0.

THE CHARGING STATION for public and private installations INGEREV® FUSION Street AC inputs and outputs Voltage supply Rated power Rated current Output connectors INGEREV® FUSION Wall 64 A (32 A + 32 A) Configurable (cables Type 1 and 2; Sockets Type 2, Type 3A, CEE 7/3 Type F, CEE Type E) Charging mode Modes 1, 2 or 3 according to couplers installed Standards and safety General standards Overcurrent Indirect contacts MCB curve C 40 A RCD 30mA type A(1) or type B / DC current leakage detector (optional) Over-voltage protection Type III Functionalities and accessories Communications Ethernet Switch...