Smart Distribution Automation System INGEPAC™ DA AU covers a wide range of applications making it possible to use one single device to fulfil every automation, protection, measurement and remote control requirements, for RMUs and overhead applications (LBS) in the secondary grid. INGEPAC™ DA AU is a modular solution being possible to customize each device for different size substations, from one to several switchgear sets, by defining the number of binary inputs and outputs, analogue inputs from transducers, and current and voltage from instrument transformers or sensors. All INGEPAC™ IEDs can be set and monitored with powerful software tools by Ingeteam running in a Windows® environment. INGEPAC™ DA AU lets choose different mechanical solutions (compact, front panel, DIN rail) and front interfaces (pushbuttons, LED, etc.), offering the optimal configuration for each requirement. This application software has been specifically designed for simple and user-friendly access to the devices. eFS 3 Automation, monitoring and protection functions Real time monitoring of the substation’s signals Local and remote control for all the feeders of the substation Voltage detection Directional fault passage indication Load transfer Automatic fault isolation Overcurrent protection Breaker Monitoring Opening, closure, kl2 counters Alarm for excessive number of trips Command failure Opening and closure command (pulsed and latched) Data Acquisition Functions Event log Oscillography By feeder: phase and neutral current, voltage, active, reactive and apparent power, power factor, frequency Digital inputs and outputs Analogue inputs from transducer Communications 2 Ethernet ports RJ45 or LC FO and 1 serial RS232/RS485, GFO or PFO Ethernet server protocols: IEC60870-5-104, IEC61850, DNP3 Slave serial protocols: IEC60870-5101, IEC60870-5-103, PROCOME Master serial protocol: Modbus RTU (for some models) Synchronisation SNTP, Irig-B Local Interface Keys for Local/Remote, Automatic/ Manual and switch operation LED indications Web Server Monitoring, setting and configuration and firmware update Other functions User logic Power sup

Overview Main features ∙ Control in one single device of several switchgear feeders ∙ Up to 4 slots for plug-in modules (binary inputs, outputs or analogue inputs) ∙ Some models include gateway function from Modbus RTU, in order to integrate devices supporting this protocol in the Smart Grid ∙ Built-in web server for remote access through a commercial browser. This access allows real time monitoring and operation, settings change and log files download ∙ User logic ∙ Programmable LEDs ∙ Voltage measurement from sensors or from conventional measurement transformers ∙ Serial and Ethernet communication...